PP Micropore Filter Cartridge

The filtration media of PP micropore filter cartridge is superfine PP fibre membrane. It is a fixed and depth filter cartridge with a wide range of pore size from 0.1um to 60um, the materials comply with FDA related requirements. It is the first choice of pre-filtration due to its unique low differential pressure, high flow rate and long service life feature. The structure of PP has stable performance and wide chemical compatibility.  

 

Specification and technical paramenters:

Filter medium: PP fibre membrane

Support layer: PP

Filter cage: PP

Pore size: 0.1, 0.2, 0.45, 0.65, 1, 3, 5 (um)

Length: 4", 5", 10", 20". 30", 40"

Sealing material: Silastic, NBR, EPDM, Viton

Airtight method: thermal bonding technique

Effective filtration area: 0.4~0.7㎡/10"

Diameter: 69.0mm

Max. operating temperature: 90℃,(△P≤0.1Mpa)

Max. positive pressure: 0.42Mpa(25℃)

Max. back pressure: 0.28Mpa(25℃)

Sterilizing temperature: 121℃  30min

Others: special requirement of diameter and end caps can be customized

Seloct filter cartridge, refer to p10 (Interface/End caps)

Typical Applications:

Medical industry: filtration for medical liquid, cell debris, biologicals

Chemical industry: filtration for organic solvent, chemical reagent, electroplate liquid, ink.

Food industry: drinking water, mineral water, beverage, beer, wine

Electronic industry: pre-filtration on water system both for counter infiltration, deionized water

Others: photoresist, magnetic media  

Complete test  (minimum bubble point)(25℃; 95%isopropanol)