PC transparent waterproof case for iphone4/4s

type: iphone4/4 s cell phone casing
Material: PC transparent
size: 120 mm x 70 mm * 18 mm
color: 7 kinds of color
OEM accept

Please note, homebred brand waterproof shell in the market sales, grand waterproof set of the waterproof cover is underwater in use, such as damage camera lost, do not keep the tail from wagging the dog! Fake distinguish way please contrast our real figure, the shell color, manual, bracelets and our pictures are not consistent.
 

specification

1, suitable model: iphone4/4 s

2, waterproof: 10 meters

3, heat resistance: 0 to 40 ℃

4, can match the company any peripheral products, the water flash

5, weight: 50 g

To meet the hobby water (underwater) activists, can realize the depth of 10 meters waterproof, let your fully capture the wonderful endless underwater world.
 

The official with standard  waterproof cover, braces, bracelets, diffusion flash board, waterproof seals use silicon grease, instructions
 

This product can freely use of your camera to film water sports photos, such as swimming, surfing, driving the yacht into depth and no more than 40 M world under the sea to shoot. You can also in rain, wind, snow, more dust or muddy environment use to shoot. No matter any environment for all your camera provide the best protection, make you experience unprecedented shooting mode.

In order to achieve the best effect and for the filming you provide the security camera protection, please according to user manual assembly and use your old camera waterproof shell.

before using detection

Every time in to use the camera before waterproof shell, please check whether the performance of good waterproof shell, whether no sand and dust. In besmear good waterproof oil no assembly camera, stuffed with paper towel in (can be better detection have slack), closed waterproof shell, seeping into at least 200 mm deep water at least 5 minutes, to ensure that no seepage of the waterproof shell appeared. Then the camera with waterproof shell into the water.

after use, maintenance
 

1, use a large number of fresh water (running water or drinking water) to thoroughly clean the outside of the waterproof shell. Higher than 40 ° C may not use the water, because this can damage waterproof shell.

2, if ever in sea water used waterproof shell, need longer cleaning time. Suggested that the water for several hours.

3, please make sure that the whole waterproof shell are into the water, contains waterproof shell safety lock device.

4, to avoid sand or dirt scratch equipment after soaking please rinse, to use soft cloth or thin cotton paper to gently dry water, ventilated place dry in the shade.

5, residue water can lead to equipment corrosion metal parts, it will affect button, two hinges and safety lock device.

6, please use soft clean cloth or blows balloons to clean equipment.
 

7, silicon rubber sealing ring off to clean after, please use seal belt pack good, can prolong service life. Or will set in cabinet, shell do not locked, let the sealing ring keep elasticity, the whole

The box is put in the absorption of moisture package appears to seal the bag