Sheet Moulding Compound SMC 5500 Export for high intensity structural components pressing

Description:

Special formula for high intensity structural components pressing;
the pressing products features fine surface finishing, low shrinkage, high intensity, etc. 

Property	Unit	Value	Test Method
Paste Viscosity	cps	≤200	Enterprise Standard
Fiber Glass Content	%	≥30	Enterprise Standard
Fiber Glass Length	mm	25.4	Enterprise Standard
Single Weight	Kg/m2	3.9-4.3	Enterprise Standard
Specific Gravity	g/cm³	1.70-1.90	ASTM D792
Water Absorption	%	≤0.15	ASTM D570
Shrinkage	%	≤0.15	ASTM D955
Flexural Strength	MPa	≥180	ASTM D790
Flexural Modulus	GPa	≥8.0	ASTM D790
Tensile Strength	MPa	≥60.0	ASTM D638
Impact Strength	J/ m2	≥60.0	ASTM D256
Hardness	Barcol	≥50	ASTM D2583

1. Holding Time: 60second/mm, which can be adjusted based on your conditions.
2. Molding Surface Temperature: from 140℃ to 155℃.
3. Pressure: > 100Kgf/ cm2

SMC is packaged by aluminum film and stored under 25℃. The storage period is two months since the production date.