Product Main

Specifications

 
Features
·         Support 2U Rack (16 channel) and independent use
·         support network management
·         Support a WEB form and simple network management protocol SNMP mode. A WEB
·         management can let user to allows monitor and manage the card status easily; Support SNMP unified network management platform
·         support ITUT prescribed DWDM/CWDM wavelength
·         transmission rate:9.95 Gb/s - 11.35 Gb/s
·         Transparent Transport for data, less delay
 
 
Introduction
 
·        
3C-OEO series products are high-performance 10G optical signals Repeaters, realize the optical signal equilibrium amplification, clock extraction and plastic regeneration, extended optical signal transmission distance greatly.
·          
·        
Using Optical - Electrical - Optical wavelength conversion and WDM (DWDM/CWDM) technology, cooperate WDM device can achieve optical signals transmit in a single fiber by single or multiple way over a long distance.
·          
·         Connection between fiber to fiber 10Gbps Ethernet equipment function as fiber mode converter ,or as fiber repeater for long distance transmission.
·          
·         Media converter for network backbone(SAN, LAN, MAN).
·          
·         Can be applied in Telecommunication room, R&D laboratory, Data center, and etc.
·         1310nm /1550nm/CWDM/DWDM Optical Wavelength Conversion.
 
  
Specifications

·         Performance Data
·         Technical Indexes
·         Equipment function
·         3R Repeater
·         Transmission Speed
·         10Gb/s ( 9.95Gb/s-11.35Gb/s )
·         Protocols
·         IEEE802.3ae (10Gbase-R/LRM)
·         Access Type
·         10G LAN/ 10G WAN
·         Interface Type
·         A Type: SFP+ To/From SFP+
·         B Type: SFP+ To/From XFP
·         C Type: XFP To/From XFP
·         Transmission Distance
·         SFP+ module: Up to 40Km
·         XFP module: Up to 80Km
·         Maximum Packet
·         Forwarding Rate
·         14,880,950/S
·         Network management
·         information:
·         •  Card type information
·         •  SFP+ or XFP fiber module detection
·         •  SFP+ or XFP fiber module DMI function ( Temperature , Voltage , Optical power )
·         •  Link status detector
·         •  Enable/Disabled Loopback test function
·         •  Enable/Disable PRBS Generator and checker function
·         •  Rate select ( 10Gbase-Lan or Wan )
·         •  Remote card's status monitor ( only in pairs )
·         power requirement
·         Rack-mountable : AC 85 ～ 220V OR DC -48V
·         Standalone: AC 220V OR -48V
·         Power consumption: ≤4W
·         Work Environment
·         Operating Temp: 0~ 50 ℃
·         Storage Temp: -10~ 70 ℃
·         Humidity: 5%~90% ( non-condensing )
·          Dimension 
·         Card : 11.5mm ( W ) × 78mm ( D )
·         Standalone : 156mm ( W ) × 128mm ( D ) × 32mm ( H )
 

  
·         SDH/SONET STM-64/OC-192, 10G fiber channel, 10G Ethernet,CWDM/DWDM
 
  
Order Information
 
Model
Description
3C-OEO-XFP-XFP
10G XFP to XFP Slots, Standalone
3C-OEO-SFP+-SFP+
10G SFP+ to SFP+ Slots, Standalone
3C-OEO-XFP-SFP+
10G SFP+ to SFP+ Slots, Standalone
3C-OEO-F16
16 Slots for 1.25G, 2.5G,10G OEO Card
XFP/SFP+ 10G Available XFP Transceiver
3C-XFP-SR
XFP 10GBASE-SR (DUAL LC/300M/850nm/Multi-Mode)
3C-XFP-LR
XFP 10GBASE-LR (DUAL LC/10KM/1310nm/Single-mode)
3C-XFP-ER
XFP 10GBASE-ER (DUAL LC/40KM/1550nm/Single-mode)
3C-XFP-ZR
XFP 10GBASE-ZR (DUAL LC/80KM/1550nm/Single-mode)
3CC-XFP-ER-XX
XFP 10GBASE-ER (DUAL LC/40KM/CWDM wavelength )
3CD-XFP-ER-XX
XFP 10GBASE-ER (DUAL LC/40KM/DWDM wavelength)
3CD-XFP-ZR-XX
XFP 10GBASE-ER (DUAL LC/80KM/DWDM wavelength)
3C-SFP+-SR
SFP+ 10GBASE-SR (DUAL LC/300M/850nm/Multi-Mode)
3C- SFP+-LR
SFP+ 10GBASE-LR (DUAL LC/10KM/1310nm/Single-mode)
3C- SFP+-ER
SFP+ 10GBASE-ER (DUAL LC/40KM/1550nm/Single-mode)
3C- SFP+-ZR
SFP+ 10GBASE-ZR (DUAL LC/80KM/1550nm/Single-mode)
3CC- SFP+-ER-XX
SFP+ 10GBASE-ER (DUAL LC/40KM/CWDM wavelength )
3CD- SFP+-ER-XX
SFP+ 10GBASE-ER (DUAL LC/40KM/DWDM wavelength)
3CD- SFP+-ZR-XX
SFP+ 10GBASE-ER (DUAL LC/80KM/DWDM wavelength)

 

 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

·         support DMI function for SFP module (Diagnostic Monitoring with), can detect light power change
·         support Loopback test function
·         support hot plugging
·         state indicator light is complete
·         Easy installation
·         3R function (balanced amplification, Timing Clock Obtaining , Shapping and regeneration), good dispersion management function, data transmission rippon at low.