Description
A slip ring can be used in any electromechanical system that requires unrestrained, continuous rotation while transmitting power and/or data from a stationary to a rotating structure.
A slip ring is also called a rotary electrical interface, commutator, collector, swivel or a rotary joint.
Sometimes a self contained “capsule” is not practical due to size constraints or cost limitations, and a “separate” is the solution. The term separate indicates an individual rotor/brush block combination.
If a separate rotor/stator approach is best for your application, consider our SRK series.
The SRK008 slip ring separate has 5 circuits and features a 8mm unobstructed bore through the center that provides routing space for hydraulics, pneumatics, or for a concentric shaft mount.
Typical applications
This separate assembly provides high speed performance and an unobstructed bore through the center of the unit. It is successfully performing in instrumentation applications where miniaturization is critical, such as:
A slip ring can be used in any electromechanical system that requires unrestrained, continuous rotation while transmitting power and/or data from a stationary to a rotating structure.
A slip ring is also called a rotary electrical interface, commutator, collector, swivel or a rotary joint.
Sometimes a self contained “capsule” is not practical due to size constraints or cost limitations, and a “separate” is the solution. The term separate indicates an individual rotor/brush block combination.
If a separate rotor/stator approach is best for your application, consider our SRK series.
The SRK008 slip ring separate has 5 circuits and features a 8mm unobstructed bore through the center that provides routing space for hydraulics, pneumatics, or for a concentric shaft mount.
Typical applications
This separate assembly provides high speed performance and an unobstructed bore through the center of the unit. It is successfully performing in instrumentation applications where miniaturization is critical, such as:
- Aircraft cockpit operation
- Sputtering machines for the manufacture of integrated circuits
- Custom machinery
- OEM machinery
- Power tools
Electrical data:
|
Parameter
|
Unit
|
|
Ring number
|
5 rings
|
|
Volts (test)
|
500VRMS
|
|
Current
|
2A/ring
|
|
Lead size
|
Adopt AWG26 Color coded, FPE insulated lead wires
|
|
Lead length
|
The rings 180mm, The brush 400mm
Or according to require |
|
Dynamic contact Resistance
|
≤15 mΩ/ring
|
Mechanical data:
|
Parameter
|
Unit
|
|
Operate Speed
|
0-100 rpm
|
|
The ring O.D.
|
21mm
|
|
Ring Pitch
|
1.3mm
|
|
Bore
|
8+0.2 0 mm
|
|
Ring Groove Geometry:
|
Raised Barrier,900 V-Groove
|
|
Contact material
(gold-gold) |
The rings adopt multilayer noble metal alloy for plating dispose
The brush adopt noble metal alloy spring material |
|
Temperature range
|
-20℃-65℃
|
Lead Wire Color Codes :
|
Ring #
|
The rings Color Code
|
The brush Color Code
|
|
#1
|
RED, RED
|
GRN
|
|
#2
|
ORN
|
YEL
|
|
#3
|
ORN
|
ORN
|
|
#4
|
BRN
|
RED
|
|
#5
|
BRN
|
BRN
|