Packaging & Delivery
|
Packaging Detail:
|
Net Weight / Bag: 25KG
|
|
Delivery Detail:
|
within 2 weeks after receive advance payment
|
Specifications
Super Tough,Very Flexible,
Lubricated PA6 Offers High Productivity
Low Temperature Toughness
Down to -40 C
SGS Inspection
Lubricated PA6 Offers High Productivity
Low Temperature Toughness
Down to -40 C
SGS Inspection
Impact modified PA6 resin, Available in natural and black.
Super Tough, high performance polyamide 6 resin. It offers outstanding molding performance in injection molding applications. High shock resistance even in the dry state and at low temperatures .
Super Tough, high performance polyamide 6 resin. It offers outstanding molding performance in injection molding applications. High shock resistance even in the dry state and at low temperatures .
|
TEST ITEMS
|
TEST METHOD AND CONDITIONS
|
TEST RESULTS
|
|||||
|
TEST METHOD
|
UNIT
|
CONDITIONS
|
|||||
|
(DRY)23
|
|||||||
|
Density
|
ISO1183
|
g/cm3
|
|
1.08
|
|||
|
Melt Volume Rate
|
ISO1133
|
cc/10min
|
(275)2.16kg
|
5.4
|
|||
|
Tensile Strength
|
ISO527
|
MPa
|
10mm/min
|
49
|
|||
|
Tensile strain at break
|
ISO527
|
%
|
|
167
|
|||
|
Flexural Strength
|
ISO178
|
MPa
|
|
49
|
|||
|
Flexural Modulus
|
ISO178
|
MPa
|
|
1,500
|
|||
|
Charpy Notched
|
ISO179
|
KJ/m2
|
2.9m/s-1J
|
38
|
|||
|
Izod Notched Impact
|
ISO180
|
KJ/m2
|
3.5m/s-1J
|
51
|
|||
|
Flame resistance
|
UL-94
|
|
|
HB
|
|||
|
Ash content
|
|
%
|
|
0
|
|||
|
Processing Guidelines
|
|||||||
|
Material Handling
Max. Water content: 0.12% Product is supplied in sealed containers and drying prior to molding is not required. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80 °C (176 °F) is recommended. Drying time is dependent on moisture level, but 4-6 hours is generally sufficient |
|||||||
|
Typical Profile
Melt Temperature 220-250°C (428-482 °F) Mold Temperature 60-90 °C (158-194 °F) Injection and Packing Pressure 35-125 bar (500-1500 psi) |
|||||||
|
Fill Rate
Fast fill rates are recommended to ensure uniform melt delivery to the cavity and prevent premature freezing. Surface appearance is directly affected by injection rate |
|||||||