Process
This product was further improved and innovated based on type B. all the features of type B air cushion is maintained but added a function of alternating fluctuation by way of connecting two groups of mutually alternated tubular air cell to two groups of air-supply pipeline of air pump which regularly and appropriately supplying air through air pipelines every 5 minutes. The gentle fluctuation resulted form alternating air supply may keep its contact surface with patient body change regularly and then relieve the suffering of a long-term bedfast patient.
Installation and Usage
1.Please keep the controller away from the head of the patient.
2.Put the mattress on the bed with the air pipe on the inner side,the fixed collar of the mattress should be fixed with the bed.
3.Put the two outside tubes respectively on the gas outlets of the controller,when installation,do not reverse the tubes back and forth.
3.Put the two outside tubes respectively on the gas outlets of the controller,when installation,do not reverse the tubes back and forth.
4.Connect the controller with the power and turn on the switch,and turn the adjustable gas knob at the maximum place.After 20 mins later,turn the knob at the right place according the patient condition.
5.The sheet ,mat and soft cushion may be put on the mattress when using.
5.The sheet ,mat and soft cushion may be put on the mattress when using.