Product Main

Specifications

Specification of main unit
Output power: DC12V
Input power: AC110V to 240V,50Hz or 60 Hz
Working hours of standby Battery(DC8.4V):More than 15 hours
Wireless frequency for above 433MHZ
 
Includes
One alarm host (main unit)
One Wireless door/window magnetic contact
One PIR sensor
Two remote controllers
One siren (More than 110DB)  
One AC adapter        
One English user manual
 
Description and Main functions
  1. Can send SMS to switch the language Chinese/English/Russian/Spanish.
  2.  Each zone has independent arm/disarm functions.
  3. 2 wired zones and 12 wireless zones.
  4. With voice reminder when users operate the system.
  5. Support two-way video communications
  6. Can work with wired & wireless sensor.
  7. Each wireless zone can use countless wireless sensors.
  8. Users can pre-record a voice message in the system and playback when system is alarmed.
  9. Send SMS text to 3 mobile phones and auto-dial 3 phones to inform the user.
  10. Users can use any phone to listen what is happening
  11. Program and control the system by keyboard, remotes, SMS or phone.
  12. Send SMS and Voice to inform users which zone is alarming when the system is triggered.
  13. Use SMS to change the zone name & content.
  14. Use SMS to inquiry the system status wherever.
  15. With password protection, System will inform users when incorrect password is tried 3 times
  16. Wireless Emergency function (24 hours zone).
  17. With Backup rechargeable battery, system can work even if there is a power is failure.
  18. Send SMS to inform you when there is a power failure or returns to normal.
  19. Can set the installation address by SMS.
  20. Can send alarm signals to monitoring center through GSM network
 
 
Usage
1. Arm/disarmed by remote controller
a. Press the button “ ” on the remote controller, the host makes “di” sound and the LOCAL LED and REMOTE LED are twinkling. 30 seconds later the host enters into arm mode and the LOCAL LED and REMOTE LED are on.                    
When the LOCAL LED and REMOTE LED are twinkling, you can press the button “ ” to enter into arm status quickly.
b. Press the button “ ” can disarm, the host make “di,di” sound, and LOCAL LED and REMOTE LED are off.
 
2. Emergency alarm function
When an emergency alarm occurs, press the button “ ” or the panic button on the alarm host, then the alarm host will get into emergency alarm mode immediately, then it will automatically start the siren for 90 seconds to inform the neighbors. At the same time, the system will automatically dial thepre-set phone numbers cycled for three times and send the SMS of “Emergency alarm”.
 
3. External power failure alarm
When the system checks out that there’s something wrong with the external power or the external power is off for more than 2 seconds, it will enter into alarm status immediately. At the same time, the system will automatically dial the pre-defined phone numbers cycled for three times and send the SMS of “External power failed”.
When the power supply restored to normal, the system will stop alarming immediately and send the SMS of “External power OK”.
 
4. Alarm Handling
When an alarm occurs, the system will start siren for 90 seconds to inform the neighbors. At the same time, the system will automatically send SMS to report the guarding zones and dial the pre-set phone numbers. When any phone is answered, the system will playback the pre-recorded voice and get into monitoring the sound at site. At this moment, the user presses the phone keypad:
“1”-------------------armed
“2”-------------------disarmed
“3”-------------------start the Siren remotely
“4”……………….Switch off siren
If the phone line is busy or can’t get through, the system will auto-dial the next phone number circularly till the one of them is answered. If nobody answers the phone, the system will stop dialing after auto-dialing circularly for three times.
Note: When you are monitoring the voice at site, the host is still on the arm mode. If any detectors are triggered, the host will broadcast the zone numbers to you.
 
5. Remote arm, disarm and monitor at site
You can use any telephone or mobile phone to dial the phone number of the host, the host will automatically get through after 15 seconds detecting and remind you of inputting password with voice. If the entered password is wrong for 3 times, the host will hand up the phone automatically; if the entering password is right, you will hear sounds: “Press one arm, press two disarm”. Meanwhile, remote monitoring will run automatically. Then press phone keypad:
 
“1”-------------------- armed
“2”-------------------- disarmed
“3”--------------------start siren
“4”………………..Switch off siren
“*”………………..the host gets into setting mode.
If the user hand up the phone, the host will automatically terminate the operation.
 
 
Operation Cautions
  1. Make sure the equipments have no water.
  2. Install the system in a hidden place, but normal GSM network.
  3. Turn off the power supply before insert/take out the SIM card.
  4. Have a hard connection to the main power supply and provide good heat dissipation.
  5. Don’t install the system close to the objects which generate strong interference, such as TV set and computer.
  6. Check all the detectors and their battery in time and change them when power is low.
  7. Inspect the GSM alarm system timely
  8.  This product is designed for the indoor use rather than outdoor use.