Specification of main unit
Electric power network: connect mode: Y
Phase-Neutral rated work voltage: AC220V
Phase-Neutral lowest work voltage: AC110V
Phase-Neutral highest work voltage: AC270V
Standby battery: DC12V/1.2AH
Anti- electromagnetic interference: IEC55022
Insulation level: grade B
Protection level: IP55
Biggest capacity of insurance tube: 3A
Temperature: -10°C~+55°C
Humidity: ≤95% (non-condensation)
Includes
One alarm host (main unit)
One wireless keyboard
One English user manual
Description and Main functions
- With 4 wired input alarm and 4 wireless zones.
- Monitor 3 phase loss voltage and single phase failure of the electric distribution network.
- Can connect line-cut/movement/vibration sensors etc. It will alarm when power transformer is damaged or moved.
- Send SMS to 6 pre-set mobile phone numbers and dial 2 phone No. automatically while alarming.
- Support settings through wireless keyboard or remotely by SMS.
- Can program the alarm mainframe and check its status by SMS demand.
- Can define the installation location by SMS demand.
- Can report the communication status of alarm mainframe in fixed time everyday.
- with fixed-time arming/disarming function.
- Completely sealed aluminum outer shell: waterproof, Antiseptic, fireproof, suitable for outdoor use.
- Can set if system send SMS to mobile phone when host is arm/disarm
- Resist electromagnetic interference, lighting and thunder
- The system has power-off protection function. When the external power supply is damaged or the power is off, the system can continue to work with a backup battery.
- Can install the solar battery that can supply the power for alarm mainframe and charge the backup battery.
- Can send alarm signals to monitoring center through CDMA network
Usage
1. Arm/disarm by wireless keyboard
After finishing to the installation turn on power switch, the alarm host will enter into running status automatically 25s later. Press button “1”, you will hear “di” sound and the ALARMLED is twinkling. It will enter into arm status in 30s and you will hear “di,di” sound for confirmation. To disarm, press button “2”, you will hear “di” sound for confirmation.
2. Types of alarm
(1)alarm when host is dismantled
(2)alarm when host is vibrated.
(3)alarm when single- phase/double-phase/three-phase fail.
(4)alarm when transformer is shocked.
(5)alarm when transformer is removed
(6)alarm of other detectors
3. Alarm and Handling
When an alarm occurs, the siren will alarm for 90 seconds to frighten the robber. At the same time, the system will auto-dial the preset phone numbers and send SMS to inform alarm information. When any phone is answered, you can hear the voice message and monitor the alarm site. If the phone line is busy or can’t put through, the system will auto-dial the next phone number circularly till one of them is answered. If nobody answers the phone, the system will stop dialing after auto-dialing circularly for three times.
Operation Cautions
- To make sure no water enter into the alarm host, please tighten all the screws up and check whether the red waterproof washer is in good condition or not. You’d better smear some waterproof glue to the connection point of GSM antenna.
- Install the system in a hidden place.
- Turn off the power supply before insert/take out SIM card.
- Check the SIM card’s status regularly ( eg. network signal, adding money to it in time)
- If replace the standby battery with larger capacity one, the jumping lines of storage battery must jump toward BIG when the capacity is larger than 2AH
- Check the standby battery in time and change it when voltage is low. It is suggested that update it once a year
- Check system’s work status regularly.
- Make sure the alarm host connect with earth firmly.
Package
1 set of ABA106 into one gift box: G.W.:1.25kgs Size:290(L)* 268(W)* 81(H) mm
10 sets ABA106 into one box: G.W.:14.5kgs Size:460(L)* 320(W)* 575(H) mm
10 sets ABA106 into one box: G.W.:14.5kgs Size:460(L)* 320(W)* 575(H) mm