Product Introduction:

Product Model Number : BLLK-SF1X8-60B

LED Lamp Bead Quantity:144PCS

Lamp Body: BT inflaming retarding ,high temperature resistance,anti-aging

LED Lamp Bead: SMD3020

Viewing Angle: 180°

Power Consumption: 8W

Input Voltage: AC220V—240v/50—60HZ

Color Temperature:6500K(true white)

Luminous Intensity:720 lumens

Efficiency: greater than 90%

Performance Factor: greater than 0.65

Protection Grade:IP66

Continuous Working :greater than 10000 hours(normal temperature 25°),greater than 20000 hours(0°～－30°)

Attenuation Ratio:1% 1000 hours(ambient temperature55°)

Working Life: greater than 50000 hours

Matching Explosion-proof Cover : Length:700mm,Width:120mm,Hight:80mm 

    The series of JM LED cold storage lamps are energy-efficient and beautiful LED lighting products, which are designed by our company for the refrigeration storage keeping fresh system. They can instant-start in 30 degrees below, so its are widely used in the storage for keeping fresh and refrigeration, which my company provides the powerful quality assurance. The lamp cover adopt the refractory material, and waterproof, moisture proof  design, very suitable for cold temperature and humidity environment. The lamp body is heat dissipation integral structure; it can drop the lamp working temperature to the optimal point effectively.  Our LED cold lamp has insulation, flame retardant, impact resistance, strong corrosion prevention and other characteristics, with high quality materials and advance circuit design, guarantee the lamps in the refrigerator for 24 hours continuous work. Contracted appearance and reasonable price is very suitable for the cold storage to use.

The characteristics of the LED cold storage lamp:

   The traditional cold storage lamp is low energy efficiency, such as metal halide lamp, high pressure mercury lamp, filament lamp, fluorescent lamp, energy saving lamp and etc, compared with the LED lamp which are high power ,low intensity of illumination, low working lifetime, air leak and hydrops. Because of the high power, the working temperature of the lamp wick needs more than 800 degrees to output the high luminous flux. In the low and damp environment, the temperature of the lamp wick can not satisfy this condition, so the lamps are slow start, low brightness, low lifetime and the lamps will burst if we start frequently.     

The energy saving lamp and the fluorescent lamp can be lighting, but the tube must reach the base temperature to excite the fluorescent powder. Below 10 to 30 degrees the both energy-saving lamps and the fluorescent lamps are very difficult to start, more difficult for the normal operation.

The cold storage will produce much moisture when it is xerantic, the moisture leads to large temperature difference between inside and outside of the incandescent lamp, so the incandescent lamp and the energy-saving lamp is often broken. It means the common lamps can not us e in the cold storage. LED is one kind of semiconductor luminescent material and self-luminous cold light source, the temperature is lower and it is better for the LED shine. The lower temperature also can reduce the light degradation and the spoilage rate, effective increase the working life .In addition, the LED is also belong to the switching device, so it is not any effect if you start and close frequently. LED lamps are the best choice for the cold storage.

The LED cold storage lamp can be widely used in the oil products low temperature storage; the logistics store cold storage, the chemical industry cold storage, medicine cold storage, the food industry cold storage, war industry and military cold storage. The temperature is -40℃ to +65℃ storage.

Waterproofing and Moistureproofing process:

Material/Craft: The outer cover is the refrigeration storage special anti-explosion cover, the light source is the LED cold storage lamp.

Waterproofing /Moistureproofing process: The complete set of lamps includes the sealing washer and quick lock sliding washer. The sealing washer outside have grease, the grease is sticky in low temperature environment, so it is effective to ensure the tightness of the washer and the complete set of lamps.

Installation/maintenance: The anti-explosion outgoing line connect 220v directly, the fixed anti-explosion cover can be used directly.

 

Advantages of the JM LED Cold Storage Lamp:

1.The outer cover is made of low shrinkage not saturated polyester glass fiber reinforced plastic, with the nice appearance, light weight, open and close flexibly, use safety simpler reliably, insulation, antiflaming, impact resistance and antiseptic advantages.

2.The light transmitting cover adopt the cold resistant PC material ,on the basic of the original cover we introduce the newest and microthermal plasticizer and inhibitor, avoided easy breakage problem, with impact resistance and high light transmittance advantages.

3.Long working life: The lamp body adopt the heat dissipation over-all structure, so the working temperature is down to the best point .The working life is 50000 hours , and it can non-stop work more than 20000 hours.

4. High efficient and energy-saving: Compare with the fluorescent lamp and common energy-saving lamp, it can save electricity 70—80% and 30---40%.

5. Instant-on: response time is 100ns,open and close frequently does not impact the working life,30 degree below also can instant start.

6. Non-pollution: all the material adopts the non-pollution, non-mercury and non-lead.

7. Anti-explosion: The over-all structure adopt the safe design and against breakage. 

8. Standard lamp socket: E27 lamp sockets, easy replacement, replace the fluorescent lamp and common energy-saving lamp directly.

9. Adopt the Nichia LED SMD bead, high lighting effect, low brightness decay.