1. OEM service is ok.
2. Three months guarantee.
3. Certification: ISO9001,CE
4. Delivery time: 3-10 work days Technical specification
INPUT
Voltage
190-264V ac
Frequency
50-60 Hz nominal
Phase
1
Wire
2
OUTPUT
Voltage
max 90V dc at 207V ac input
Current
continuous 4A dc
Intermittent 6A for 10 secs
Resistance
15 ohms minimum
REGULATION
+/- 1% (see note 1)
THERMAL DRIFT
0.04% per deg. C change in AVR ambient (note 2)
TYPICAL SYSTEM RESPONSE
AVR response
20ms
Filed current to 90%
80 ms
Machine Volts to 97%
300ms
EXTERNAL VOLTAGE ADJUSTMENT
+/-10% with 1 k ohm 1 watt trimmer (see note 3)
UNDER FREQUENCY PROTECTION
Set point
95% Hz (see note 4)
Slope
170% down to 30 Hz
UNIT POWER DISSIPATION
12 watts maximum
BUILD UP VOLTAGE
4 Volts @ AVR terminals
ANALOGUE INPUT
Maximum input +/- 5V dc (see note 5)
Sensitivity 1v for 5% Generator Volts (adjustable)
Input resistance 1k ohm
QUADRATURE DROOP INPUT
10 ohms burden
Max. sensitivity: 0.07 A for 5% droop 0PF
Max. input: 0.33A
ENVIRONMENTAL
Vibration
20-100 Hz
50mm/sec
100Hz – 2kHz
3.3g
Operating temperature
-40 to +70 oC
Relative Humidity 0-70 oC
95% (see note 6)
Storage temperature
-55 to +80 oC
NOTES
1. With 4% engine governing.
2. After 10 minutes.
3. Applies to Mod status S onwards. Generator de-rate
may apply. Check with factory.
4. Factory set, semi-sealed, jumper selectable.
5. Any device connected to the analogue input must be
fully floating (galvanically isolated from ground), with an
insulation strength of 500V ac.
6. Non condensing.