High Pressure Suspension Grinder is applied to the mineral materials below mohs hardness of 9.3 and humidness of 6%, widely used in the following fields: metallurgy, construction, chemicals, mining, water conservancy, water & electricity and so on. It is a best choice to crush the materials as follows: quartz, feldspar, calcite, limestone, talc , ceram, marble, granite, dolomite, bauxite, iron ore, barite, betonies, gangue, coal etc. the discharging products can be adjusted between 0.613mm-0.0033mm.
High Pressure Suspension Grinder with the following features is mainly applied to the powder processing of mineral products in the industries of metallurgy.
1. Compared with the common Raymond under the same power conditions, the capacity can be increased by 10%, under the performance of high-pressure springs, the rollers grinding pressure on raw materials can be raised by 1500kgf.
2. All the mineral materials with Mohs hardness below 9.3 can be crushed.
3. The final product size ranges from the maximum particle diameter of 0.95mm (20mesh) to the finest diameter of 0.038mm (400 mesh). A few materials can reach 0.013mm (1000 mesh).
4. Its dust-removing effect fully meets the national dust discharge standard.
5. The classifier is easy for adjustment.
6. The grinding device adopts a superposition multi-grade sealing with good sealing performance.