Reformed rubber elevator belt

The carcass is a kind of rubber dipped synthetic fabric bearing low stretched polyester warp and nylon weft. Adding a wear resistant fabric on the side which the belt contact with the elevator pulley which works as the interface between the elevator belt and the pulley. 

Features:
1. Low extensibility, high tensile strength, oil resistant, suitable for moderate oily material.
2. The reformed structure that adding a wear resistant fabric on the side which the belt contact with the elevator pulley can improve the transmission efficiency of the elevators, enhance the fastener retention and prevent the bolt from pulling through the belt, to ensure the tight join of bucket and belt.
3. No cover rubber splitting caused by frequent contact with the pulley.
4. More cost effective than the traditional rubber elevator belt.

Technical Data:

  

Model	Color	Tensile strength in Warp Ibs/p.i.w	Wise N / mm	Thickness mm	Working Temperature ℃	Elongation at rated load   %	Recommend Minimum Diameter of pulley (ø)
PVC170	Cover PVC: Blue   Carcass: White	170	300	4.2	-35～+85	0.6	100
PVC300		300	526	5.6		0.6	150
PVC450		450	800	7.2		0.7	250
PVC600		600	1050	9		0.7	350