We are a manufacturer with more than 20years history, ISO9001: 2008 Quality Management Certificate, we provide a one year warranty and whole life technical service. We can provide a wide range of products according to your special requirements.

GM series hydraulic motors, which are also called radial piston hydraulic motors, are a result of many years of experience based on Italy technology. It incorporates a number of design variations with respect to many series intended to increase the strength of the motor casings and the load capacity of the internal dynamic components.

Features 1. High mechanical efficiency, high starting torque GM Series motors reduce friction loss in force transmission because of no side force between piston and swing cylinder, hydrostatic balance designed in piston foot and transferring torque force through roller bearing. Therefore, GM series hydraulic motors have high mechanical efficiency and high starting torque (above 0.92).

 2. High volumetric efficiency The flat distributor is simple, reliable and good seal and theres no leakage between piston and swing cylinder through using plastic seal ring, so motors have high volumetric efficiency.

3. High specific speed range Because of reducing friction loss in configuration and improving seal ability, these motors can run steadily in 1 r/min condition. Moreover, theres no gap between piston and bearing cover connected by ring clip, so they can run with high speed when inlet is sealed and the ratio (max speed) is higher than any other type of equivalent hydraulic motor, giving greater flexibility of application.

4. Minimize heat generation, due to the reduced friction area.

5. Low noise, high lifetime, high power and high external loads. These series motors have high pressure, with the Max pressure 45Mpa, light weight, small volume, high power; Using high loaded bearing, so they have reliable performance, long life, low noise and transmission shaft can bear radial load and rotate in opposite direction.

GM05-60 GM05-75 GM05-90 GM05-110 GM05-130 GM05-150 GM05-170 GM05-200 GM1-100 GM1-150 GM1-175 GM1-200 GM1-250 GM1-300 GM1-320 GM1-350 GM2-200 GM2-250 GM2-300 GM2-350 GM2-420 GM2-500 GM2-600 GM2-630 GM3-425 GM3-500 GM3-600 GM3-700 GM3-800 GM3-900 GM3-1000 GM4-600 GM4-800 GM4-900 GM4-1000 GM4-1100 GM4-1300 GM5-800 GM5-1000 GM5-1200 GM5-1300 GM5-1450 GM5-1600 GM5-1800 GM5-2000 GM6-1700 GM6-2100 GM6-2500 GM6-3000 GM7-2000 GM7-2500 GM7-3000 GM7-3300 GM7-3600 GM7-4300