wet wire drawing machine

Product name:

1, use: for the cord steel wire drawing.

2, main technical parameters:

(1) into line diameter: 1.2 2.0 mm n

(2) into line strength: 1450 MPa

(3) outlet diameter: 0.15 0.38 mm

(4) before 20 way average department pressure: 14.5%, to 10.5% at the end of the word

(5) drawing speed: the highest drawing speed: 20 m/s

(6) the motor power: water tank 22 KW, accept line 3 KW; All for the ac frequency conversion motor

(7) pull out DaLun: pull out DaLun by a single chip assembly, the surface spraying tungsten carbide is hard and gold, HRC58-62

(8) transmission form: the host: synchronous cog belt transmission; Accept line: V belt