Description

ADSS cable is loose tube stranded. Fibers,  250μm , are positioned into a loose tube made of high modulus plastics. The tubes are filled with a waterresistant filling compound. The tubes (and fillers) are stranded around a FRP (Fiber Reinforced Plastic) as a nonmetallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. it is covered with thin PE (polyethylene) inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath.

Characteristics
1.Can be installed without shutting off the power
2. Excellent AT performance, The maximum inductive at the operating point of AT sheath can reach 25kV
3.Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops
4.Large span lengths and the largest span is over 1000m
5.Good performance of tensile strength and temperature

Specifications
No.of cores                    4~144
The cable’s outer diameter(mm)   9.1~17.0
The cable’s weight (kg/km)          70~210
Permissible tensile force (N) 
Temporary tensile force ≤1500
Long term tensile force≤600
Permissible crush force(N/100mm)
Temporary crush force≤1000
Long term crush force≤300
Min bending radius (mm)
Dynamic bending    20 times outer diameter of optic cable
Static bending    10 times outer diameter of optic cable
Operating temperature        -40~+600C