Model: Aujet-100

1. Stainless steel self-priming jet water pump

 

1.high quality ,low price
2.press protector
3.low price

 

2. Applications

 

These pumps are suitable for pumping clean water and fluids which are not chemically aggressive to the pump components. They are extremely reliable,light,economical and simple to use,finding many uses in domestic applications, in particular the automatic distribution of water from small and medium-sized surge tanks,watering gardens,etc.These pumps should be installed in a covered area,protected against the weather.n.b.it is always advisable to install a foot valve or a non-return valve on the suction opening.

 

3.Material 

                         

stainless steel pump body
stainless steel pump body cover
stainless steel mechanical seal (graphite to ceramic)
brass impeller with centrifugal radial flow type
Hi-Cr plated 45# steel shaft
protection IP44
with thermal overload protector in single phase motor
Brand bearing or local bearing

 

4. Operation condition

Suction lift up to 9 m
Liquid temperature up to +40oC
Ambient temperature up to +40 oC
Max. Working pressure: 6 bar

Continuous duty

 

5. STANDARD DATA AND EQUIPMENT

 

Single phase 220/50Hz.

Brass impeller,

carbon steel motor shaft,with themal protector inside.

Oher model and material such as three phase,110V,60Hz,dual voltage,stainless shaft,etc, will be available.

 

6. Technical data

 

1. Power: 0.5-1 hp
3. Total head 30-50m
4. Flow42-50 L/min
5. Voltage and frequency 110V-380v, 50HZ/60HZ