water pump Self priming pump (M-60,M-70,M-80)
1. Product Overview
The self-prime JET pump with good starting performance, low noise, nice appearance, and compact structure, is efficient and economical, is applied for family own water supplying. The JET pump can start when the water pressure is low and shut off when it’s beyond the rated water pressure automatically.
2. Installation and applications
These JET pumps are suitable for pumping clean water and fluids which are not chemically aggressive to the pump components. JET series are extremely reliable,economical and simple to use, being particularly suitable for domestic applications such as the automatic distribution of water from small and medium-sized surge tanks, watering gardens,etc .JET pumps should be installed in a covered area, protected against the weather. N.B.it is lways advisable to install a foot valve or a non-return valve on the suction opening.
3.Operating limits
The temperature shall not be beyond 40°C, Ph should be between 6.5-8.5.
The volume ratio of solid partial content should be within 0.1% and the size of solid partial
must be below 0.2mm.
The power should be 220V and 50Hz, and voltage is allowed to fluctuate between 0.9 to 1.1 kw
times of its rated voltage.
The pump should be fully submerged into water with submerged depth of less than 3.0m and
max depth of 5.0m.
The pump should be mini 0.5m over the water bottom and not inserted.
4.Technical data
Model: M-60 370W
Power: 370W
Max.Head: 35 m
Max.Capacity: 40 L/min
MODEL | POWER | VOLTAGE | FREQUENCE | MAX.HEAD | MAX.CAPACITY | SPEED | DIAMETER |
W | V | HZ | M | L/MIN | R/MIN | INCH | |
JSW-6M | 370 | 220 | 50 | 35 | 40 | 2860 | 1" * 1" |
JSW-8M | 550 | 220 | 50 | 42 | 50 | 2860 | 1" * 1" |
JSW-10M | 750 | 220 | 50 | 45 | 60 | 2860 | 1" * 1" |
5. Structural characteristics
cast iron pump body
stainless steel mechanical seal (graphite to ceramic)
brass impeller with centrifugal radial flow type
Hi-Cr plated 45# steel shaft
protection IP44
stainless steel mechanical seal (graphite to ceramic)
brass impeller with centrifugal radial flow type
Hi-Cr plated 45# steel shaft
protection IP44
with thermal overload protector in single phase motor
Brand bearing or local bearing
Brand bearing or local bearing
6. Standard Data And Equipment
Single phase 220V/50Hz,Brass impeller,carbon Steel motor shaft,with thermal protector
inside.Other model and material such as three phase,110V.60Hz,dualvoltage,stainless shaft, ect,
Will be available upon request.
7. Pump Features
JET series self-priming pumps are high efficient jetting pump with excellent suction even when there are air bubbles. The pump consists a single impeller, centrifugal pump and a nozzle with a jet pipe. The series pumps are particularly suitable for water supplying in domestic
installations, small-scale agriculture watering and where self-priming operation is demanded.
8. Pump's Accessories
Tank: 24L (carbon steel or stainless steel)
Tank: 24L (carbon steel or stainless steel)
Flexible hose
Pressure switch
Pressure gauge
Brass connector
9. Packing & delivery
1package in a carton box or follow client's request
Carton Dimension(cm): 44*20*23
G.W. :15kg
Delivery Detail: About 30 days after receiving deposit or original L/C
10. Certificate
CE
ISO9001
11. Promise
Founded in 1980, we are a manufacturer specializing in submersible pumps, self-priming pumps, deep well pumps, JET pumps, QB pumps, centrifugal pumps, circulator pumps,booster pumps, etc. We adhere to the principle of "quality, innovation and price" and pay attention to science and technology, so we are reliable and we can provide you with competitive products. We are looking forward to establishing mutual benefit and long-term business with more and more friends worldwide.