Nomex Roller with heat resistance of 280C (536F), is usually used for Finish Cut Saw Table of the aluminium extrusion handling system.
Actually, Nomex Roller is not necessary for every handling system. It becomes available only for those lines with large press and producing larger irregular profiles. After cooled off through the initial area, run-out area and cooling table, the temperature is still higher than what Polyester one can resist, then Nomex Roller is better.
Model No.
|
Roller-N
|
Material
|
100% Nomex/Meta-aramid Fiber
|
Color
|
Off White
|
Working Temperature
|
280C (536F) for Short Time & 200C to 250C (392F to 482F) for Long Time
|
Advantage
|
High Density, Temperature & Abrasion Resistant, Smooth Cutting, No Delaminating, No Corrugation, No Fluffing, No Pollution
|
Specifications Available:
Length: All Sized Available
Inside Diameter: 37mm, 38mm, 39mm, 40mm, 49mm, 50mm, 52mm, 53mm, 60mm, 62mm, 63mm, 65mm, 73mm, 75mm, 76mm, 80mm, 81mm, 82mm, 85mm, 90mm, 95mm, 100mm, 101mm, 110mm, 113mm, 115mm, 130mm, 131mm, 140mm, 141mm
Thickness: 6mm, 8mm, 10mm, 12mm
Customized length, inside diameter and outside diameter or thickness are accepted.