Low-temp Spacer Sleeve is mainly used as covering for the half-finished extruded profiles which need not be pushed into the aging oven. Placing between two layers of profiles and it may keep the profile from being scraped and also maintain good ventilation. It applies even more to profiles of oxidizing and powder coating.
|
Model No.
|
Sleeve-P
|
|
Material
|
100% Polyester Fiber Sewn with Polyester Thread
|
|
Color
|
White, Black, Pink, Blue, Yellow
|
|
Working Temperature
|
280C (536F) for Short Time & 200C to 250C (392F to 482F) for Long Time
|
|
Advantage
|
High Density, Temperature & Abrasion Resistant, Smooth Cutting, No Delaminating, No Corrugation, No Fluffing, No Pollution
|
Specifications Available:
Length: Profile Length + 10mm (With One Side Sewn) or Profile Length + 20mm (With Two Sides Sewn)
Length: Profile Length + 10mm (With One Side Sewn) or Profile Length + 20mm (With Two Sides Sewn)
Width: (Profile Width + Profile Thickness) × 2 + 10mm
Thickness: 1.5mm, 2mm
Specification of Spacer Sleeves is based on that of aluminium profiles. Customized length, width, thickness of Spacer Sleeves are accepted.