Famous brand grinding mill application:
Raymond grinding mill is used in the mining, metallurgical, industrial, chemical engineering and building material industries.

This series, our patent product, is used in grinding the non-inflammable and non-explosive stuff with Moh’s hardness below 9.3 and humidity less than 6%, such as barite, limestone, ceramics, slay, etc. Fineness of final product can be adjusted between 80 and 425 meshes and part of then can add up to 1000 meshes of final being equipped particular parts, the machine can produce coarse powders ranging from 30 to 80 meshes.

Famous brand grinding mill Features

1) Produces and processes fine powder
2) The product size is adjustable from 80 meshes to 425 meshes
3) It is possible to produce 30 - 80 mesh coarse powder through a special device
in the machine.

 

Famous grinding mill Working Principle
In the main frame, a 100 - 1,500kg powered pressure spring is fixed to the roller suspender. After the grinder is put into effect, the roller rotates around the main shaft, and rolls closely against the ring pressed by the high pressure spring and centrifugal force. With a rolling pressure ratio that is 1.2 times higher than that of the Raymond grinder under the same power conditions, production output is raised substantially.

(1) The materials enter the grinding room of main equipment, the grinding roller swings outward and presses closely upon the grinding ring due to the centrifugal force generated by the rotation of the main shaft.

(2) The blade carries materials to the space between the grinding roll and grinding ring, and materials are ground as the grinding roller rolls.

(3) After being ground, the powder is selected by classifier via the cycle wind of the blower and the rough powder will be back to the grinding room for regrinding.

(4) The qualified powder is brought into the powder collector together with airflow. The powder comes out as end products while the airflow goes back to the powder collector in cycling to make the machine work normally. The remained airflow comes out after purification by dust catcher.

 

Our service philosophy:

Pre-sale services: enthusiasm - Provide you the prophase plan, process flow design and manufacture equipment according to your special demand.

Sale services: servant - Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.

After-sale services: faithfulness - To establish long term friendship, we will regularly pay return visit to customers.

Service is part of our product and competitive strength. We always hold that the service standard of “users’ demands are orientation to implement the service management, users’ satisfaction is goal to carry out the brand service”. The service spirits of “enthusiasm, servant and faithfulness” should run through the whole service system. Working hard for making specialty classic, to make our persistent pursuit of “establishing Hongxing brand, satisfying customers” comes true.

Technical Data of grinding mill: