Slurry dryer is a drum dryer made on the basis of a new developed special drying equipment, primarily from the rotary drum \ induced draft fan, discharge devices, heat, tape feeding machine, broken up devices, feeder, belt out the feeder and distribution cabinet composition, can be widely applied:
1, slime coal industry, coal, flotation coal, mixed coal and other dry materials;
2, the construction industry, blast furnace slag, clay, bentonite, limestone, sand, quartz stone and other materials drying;
3, mineral industry, metal concentrates, residues, tailings and other materials drying;
4, chemical industry, non-drying heat-sensitive materials.
Features :
1, drying machine is downstream drying, smoke and wet into the dry material from the same side of the machine, can take advantage of high-temperature flue gas to obtain a high evaporation intensity dryer outlet temperature is low, thermal efficiency, low fuel consumption , drying costs Low-, anti-overload strong, large capacity;
2, the new feeding, nesting devices, put an end to the drum dryer feed plug, not continuous, uneven, and returning materials such phenomena, reducing the load of dust removal system, according to the changing nature of the different operating parameters of materials , so that the material in dryer cylinder body to form a stable full-cut fabric curtain, quality heat exchange is more fully;
3, the new internal structure, and strengthen the cleaning materials that have been scattered and heat conduction, eliminating the cylinder wall adhesions phenomenon, material moisture, sticky and adaptable;
4, drying machine a "self-aligning roller-type device", so that roller and the rolling ring linear co-ordination always contact, thereby greatly reducing wear and power loss, drying machine to achieve a "zero thrust," greatly reducing wear roller block, cylinder smooth and reliable operation;
5, are available on request size and moisture control products, dry slime products at up to 8% or less moisture, particle size can be controlled below 8mm.
Related technical parameters: