It is final target for equipment to meet the requirement of technology. We can provide all kinds of non-standard equipment that can meet the requirements of technology.
Summary
The raw material to be treated should distribute on the conveyer belt through suitable mechanism such as star distributor, swing belt, crusher or granulator. The conveyer passes through the channel consisting of one or several heating unit. Each heating unit is equipped with air heat and circle system. Each channel has one or several damp discharge systems. When the conveyer passes through it, hot air will pass through the raw material from up to low or from low to up. In this way the raw material can be dried evenly.
Application
The belt drier is ordinary continuous drying equipment. It is widely used for chemical industry, foodstuff industry, pharmaceutical industry, construction materials industry, electronics industry and so on. Especially it is suitable for drying raw materials that are good in berathability and have the shape of pieces or strip of granule. It is also possible the pasted raw material such as filter cake after shaped through granulator or extruder.
Typical Pruducts
Dehydrated vegetable, granule feed, moosodium glutamate, check extraction, organic pigment, synthetic rubber, propylene fiber, medicine, medical material, small wooden products, plastic products, aging or solidifying for electronic elements.
Technical Parameters
mode |
DW-1.2-8A |
DW-1.2-10A |
DW-1.6-8A |
DW-1.6-10A |
DW-2.0-8A |
DW-2.0-10A |
|
quantity of unit |
4 |
5 |
4 |
5 |
4 |
5 |
|
length of drying section |
8M |
10M |
8M |
10M |
8M |
10M |
|
thickness of raw material spreading |
<=60mm |
||||||
operation temperature |
50-140℃ |
||||||
steam pressure |
0.2-0.8MPa |
||||||
steam consume |
120-300 |
150-375 |
150-375 |
170-470 |
180-500 |
225-600 |
|
drying time |
0.2-1.2h |
0.25-1.5 |
0.2-1.2 |
0.25-1.5 |
0.2-1.2 |
0.25-1.5 |
|
drying strength |
6-30Kg water/m2h |
||||||
power equipped |
11.4Kw |
13.6Kw |
11.4Kw |
13.6Kw |
12.5Kw |
14.7Kw |
|
overall dimensions |
A |
1.2m |
1.2m |
1.6m |
1.6m |
2.0m |
2.0m |
A1 |
2.28m |
2.28m |
2.68m |
2.68m |
3.2m |
3.2m |
|
B |
8.0m |
10.0m |
8.0m |
10.0m |
8.0m |
10.0m |
|
B1 |
9.5m |
11.5m |
9.5m |
11.5m |
9.5m |
11.5m |
|
C |
2.5m |
2.5m |
2.5m |
2.5m |
2.6m |
2.6m |
|
Explanation: The parameters above mentioned are for reference only. The dry strength is concerned with many factors such as properties of raw material, operation temperature. The steam consumption is kg/hr. |
mode |
DW-1.2-8B |
DW-1.2-10B |
DW-1.6-8B |
DW-1.6-10B |
DW-2.0-8B |
DW-2.0-10B |
|
quantity of unit |
5 |
6 |
5 |
6 |
5 |
6 |
|
length of drying section |
8M |
10M |
8M |
10M |
8M |
10M |
|
thickness of raw material spreading |
<=60mm |
||||||
operation temperature |
50-140℃ |
||||||
steam pressure |
0.2-0.8MPa |
||||||
steam consume |
120-300 |
150-375 |
150-375 |
170-470 |
180-500 |
225-600 |
|
drying time |
0.2-1.2h |
0.25-1.5 |
0.2-1.2 |
0.25-1.5 |
0.2-1.2 |
0.25-1.5 |
|
drying strength |
6-30Kg water/m2h |
||||||
power equipped |
13.6Kw |
15.8Kw |
13.6Kw |
15.8Kw |
14.7Kw |
16.9Kw |
|
overall dimensions |
A |
1.2m |
1.2m |
1.6m |
1.6m |
2.0m |
2.0m |
A1 |
1.95m |
1.95m |
2.35m |
2.35m |
2.75m |
2.75m |
|
B |
8.0m |
10.0m |
8.0m |
10.0m |
10.0m |
10.0m |
|
B1 |
9.5m |
11.5m |
9.5m |
11.5m |
9.5m |
11.5m |
|
C |
2.5m |
2.5m |
2.5m |
2.5m |
2.6m |
2.6m |
Explanation:the parameters above mentione is for reference only.The dry strenth is concerned with many factors such as properties of raw material,operation temperature.The steam consume is kg/hr.