Details:
Combined SPDs are multiple function SPDs which can provide power supply protection, signal protection and/or antenna feeding protection. Generally, a combined SPD consists of two parts: Power supply protection and signal protection. Combined SPDs are usually used in cell station, network equipment, etc.
Combined SPDs are multiple function SPDs which can provide power supply protection, signal protection and/or antenna feeding protection. Generally, a combined SPD consists of two parts: Power supply protection and signal protection. Combined SPDs are usually used in cell station, network equipment, etc.
Characteristics
1. Space-saving and convention for installation&maintenance
2. Adopt metal seal enclosure
3. Easy for connection
4. Waterproof, dustproof, anticorrosion, explosion-proof, flame retardant and electromagnetic shielding functions
5. Serial protection circuit of two stages, good protection performance and very low residual voltage
1. Space-saving and convention for installation&maintenance
2. Adopt metal seal enclosure
3. Easy for connection
4. Waterproof, dustproof, anticorrosion, explosion-proof, flame retardant and electromagnetic shielding functions
5. Serial protection circuit of two stages, good protection performance and very low residual voltage
Model
|
D05J4-8
|
|
Max continuous operating voltage
|
5V
|
|
Nominal discharge current (8/20µs)
|
3kA
|
|
Max discharge current (8/20µs)
|
5kA
|
|
limiting Voltage
|
Line-ground
|
≤20V
|
(10/700μs)
|
||
Response time (ns)
|
1ns
|
|
Adapt transmission rate (Mbps)
|
100Mbps
|
|
Insertion loss (dB)
|
≤0.5dB
|
|
Protection form(four lines/way)
|
1/2, 3/6
|
|
Connector type
|
RJ45
|
|
Dimension(no grounding line) (mm)
|
190×87×44mm
|
|
Working condition
|
Temperature: -40~+85℃Relative humidity: ≤95%
|