Product Main

Specifications

Model: JL-3528L-60WW
Color: Warm white 
Working voltage: 12V DC
LEDs/meter:60pcs
Dimension: 5000mm*8mm
Power Comsumption: ≤4.8W/M
Lumen:300
View angel:120
Package:5m*20
Description:
600pcs SMD LEDs/5m 3528 LED Light Strip  
This 600pcs LED Strip Light is to satisfy people`s demand for high-brightness white light,you can replace the indoor lighting also has a good decorative effect.
 
  • Features:
  • 1: Red/Green/Blue/Yellow/Pure White/Warm White available.
    2: 3pcs LEDs per unit; Can be cut by 3 LED(DC12V)and 6LED (24V)and connect again by our accessories.
    3: With accessories to help strip easy installation, strip continuous connection and strip connection to LED drivers.
    4: With 3M adhersive tape back,easy for installation.
    5: Can be changed into waterpoof with type A and typeB.
    6: Input Voltage DC12V or DC24V.
  • This Flexible LED strip lights can be in waterproof:
    A type: waterproof with Silicone Tube IP67;
    B type: waterproof with Silicone Glue IP68;
    D type: waterproof with Heat-shrink tube IP68;
  •  
  • Parameter:
  • Model: LED Q'ty LED
    Type    		 CCT Range Size(MM) d(nm)/Tc(K) Flux(±5%) Max
    Power    		 Lifetime
    JL-3528L-60W 600PCS TOP
    SMD
    3528
    LED    		 Pure White 5000X10 5500-6500K 2874lm 48W 30,000h
    JL-3528L-60WW 600PCS Warm White 3000-3500K 2781lm 30,000h
    JL-3528L-60R 600PCS Red 620-625nm 802.4lm 50,000h
    JL-3528L-60G 600PCS Green 520-525nm 2402lm 50,000h
    JL-3528L-60B 600PCS Blue 465-470nm 658.8lm 50,000h
    JL-3528L-60Y 600PCS Yellow 585-590nm 967.6lm 50,000h
    The data above is under the test condition of Ta =25 degree ,DC 12V ,RH 85%
  • Dimension:
  •  
  • Connect Drawing:
  •  

  • Application :
  • Architectural lighting for window ,archway ,canopy and corridor.
    Decorative lights for holiday ,event ,show,exhibition .
    DIY light for home use.
    Backlight or edge lighting for sign.
     
  • Operation Guidance:
  •  
  • Step A 1 : Pull out the black clip carefully.
    Step A 2 :Cut the LED light strip at the mark scissors or by every 3 LEDs.
    Step A 3 : Put the light strip in the space between the clip and connector .
    Step A 4 : Push the clip in original position.
  •  
  • Step B 1 : Pull out the black clip of each side carefully.
    Step B 2 : Pull the flexible led strip in the space between the clip and connector at one side .
    Step B 3 : Put the flexible led strip in the space between the clip and connector at the other side ,and push the clip in original position.
     
  • Accessories:
  •  

  • Note:
  • 1Please make LED drivers compatible with flexible LED strips before use LED strips;
    2To use LED strips 5M in serial, longer than 5M in parallel;
    3Before use,first check the power supply used in compliance with of the power requirements;
    4Each roll ask for independent power supply;not to use of multi-volume series use;