1 Material: HDPE
2 Diameter Nominal: 20-800mm
3 Wall Thickness: 2.3-57.2mm
4 Pressure: 0.6-1.6Mpa
5 Standard: GB/T 13663
Applications:
2 Diameter Nominal: 20-800mm
3 Wall Thickness: 2.3-57.2mm
4 Pressure: 0.6-1.6Mpa
5 Standard: GB/T 13663
Introduction of HDPE corrugated drain pipe
High-density polyethylene pipe(HDPE pipe) is made from high density polyethylene as the main raw material, adding a small amount of antioxidants, Anti-UV absorbers and pigments.
Guorun HDPE pipe’s main characteristics:
1. Long lifespan
It can be used for more than 50 years under normal condition
2. Good sanitary performance
It isn’t added the heavy metal salt stabilizer, and its material is non-toxic, does not scale. It is not easy to form dirt, and avoids secondary pollution of drinking water
3. Good corrosion resistance
It can resist variety of chemical mediator except few oxidants
4. Good crack growth resistance
5. Little coefficient of friction and low flow resistance
6. Excellent wear resistance
Its wear resistance is 4 times higher than steel pipe under normal conditions.
7. Good solderability
Its interface strength is higher than the pipe body
8. Fine flexibility and anti-scratch ability
9. Low cost
It can reduce the cost of project substantially
Guorun HDPE pipe can be widely applied to below fields:
1. City and town water supply
2. To transport natural gas & coal gas
3. Food & chemical industry
4. To transport ore & mud
5. To replace cement pipe, cast iron pipe & steel pipe
6. Landscaping pipeline
Guorun HDPE pipe’s outer diameter is from 20 mm to 800 mm, and its wall thickness is 2.3 mm to 57.3 mm mainly.