Introduction of Freeze Dryer
The vacuum freezing drying technology, which is also called sublimation drying,
is a technical method that freezes the samples in advance, and then sublimates
its moisture in the vacuum state. Materials are easier for long term preservation
after freezing drying processing.
They can be restored to the original state and maintain its chemical and biological characteristics after being watered. So the freezing drying technology is widely used
in medicine, pharmacy, food production, chemistry industry and biological products etc.
LGJ-30F Freeze Dryer with stopper
The vacuum freezing drying technology, which is also called sublimation drying,
is a technical method that freezes the samples in advance, and then sublimates
its moisture in the vacuum state. Materials are easier for long term preservation
after freezing drying processing.
They can be restored to the original state and maintain its chemical and biological characteristics after being watered. So the freezing drying technology is widely used
in medicine, pharmacy, food production, chemistry industry and biological products etc.
LGJ-30F Freeze Dryer with stopper
LGJ-30F Freeze Dryer is suitable for a small amount production,
freeze-drying experiment in laboratory or pilot scale test.
freeze-drying experiment in laboratory or pilot scale test.
This series of dryers have the heating shelf and the freeze drying process are made
in the same place. It changes the traditional complicated operation and prevent the
product from pollution.
in the same place. It changes the traditional complicated operation and prevent the
product from pollution.
Main Features
With heating shelf and PLC control standard
Freeze and drying process are completed in the same place
With organic glass observation window, the whole process is easy to see
The temperature error of shelf is less than or equal to 1℃
Fluid fills hollow shelves, with the most uniform shelf temperature and consistent
and repeatable drying possible
and repeatable drying possible
Condenser is separated from drying chamber ,so the water capture capacity is better
and drying time is shorter
and drying time is shorter
Liquid crystal display, English interface, display of drying curves
Internal surface of rectangular chamber and product tray are of stainless steel
Internal surface of rectangular chamber and product tray are of stainless steel
Air-letin valve with nitrogen is optional
Eutectic point test device is optional
Technical Parameter
Condenser temperature
|
Min.≤-70℃
|
Heating shelf temperature
|
-50℃----+70℃
|
Vacuum degree
|
≤10 Pa
|
Freeze drying area
|
0.3㎡
|
Condenser capacity
|
6 L /24h
|
Shelf layers
|
3+1 layers; 70mm spacing
|
Shelf size
|
300x340x15
|
Bulk capacity
|
3L, 10mm thickness
|
Vial capacity Φ12mm
|
1950 pcs
|
Vial capacity Φ16mm
|
1080 pcs
|
Vial capacity Φ22mm
|
546 pcs
|
Electric defrosting
|
Available
|
Style of press
|
By hand or Hydraulic
|
Cooling
|
Air
ambient temperature≤25℃
|
Power
|
380V, 50Hz
|
Dimension
|
1060x700x(1500+400) mm
|