Cable Drilling Rig
Application of Drilling Rig
Application of Drilling Rig
1. Percussion drilling rig is mainly used in deep foundation engineering (tall building engineering, water conservancy project, bridge construction) construction of large caliber cast-in place pile and construction of diaphragm wall and deep water well. It can adapt to various geological conditions, especially to pebble bed and rock stratum. Percussion drilling rig is more applicable than the other kinds of drilling machines with high efficiency and long durable.
2. The drill bit of Percussion drilling rig can break rock into pieces and then use the slag exhausting equipment to clean the slag out of the hole. The drill bit can drive the soil, sand, pebble and etc into around of the hole, no need to exhaust them out of the holes, improve the working efficiency. Meanwhile, the formed hole wall is high dense and strong, which is very useful for stabilizing the hold wall and improving the carrying capacity of the pile foundation
3. Percussion drilling rig is very popular in the market currently, all of its components are all installed in the trailer, like electric motor, hoist, mast etc, integrate motion. The percussion drilling rig uses the crank-link mechanism to change the power's gyration motion into alternating motion, through the steel cable to drive the drill bit to do up-and-down motion.
Main Technical Specification
|
Name
|
Technical parameter
|
Remarks
|
||
|
Model
|
RS-22S
|
|
||
|
Max. Drilling Diameter
|
1.2 m
|
|
||
|
Max. Drilling Depth
|
300 m
|
With 200mm drilling diameter
|
||
|
Max. Weight of Drill Bit
|
2000 kg
|
When the impact frequency is
40/min, impact stroke is 1m
|
||
|
Frequency of Drill Bit
|
40-45-50/min.
|
|
||
|
Impact Stroke of Drill Bit
|
350-1000 mm
|
|
||
|
Hoisting capacity of Coiling Block
|
For Drill Bit
|
25 kN
|
|
|
|
For Slag
|
13 kN
|
|
||
|
For Auxiliary
|
15 kN
|
|
||
|
Hoisting speed of steel cable
|
For Drill Bit
|
1.18-1.32-1.47 m/s
|
|
|
|
For Slag
|
1.25-1.40-1.56 m/s
|
|
||
|
For Auxiliary
|
0.81-0.91-1.02 m/s
|
|
||
|
Type and Capacity of steel cable of Coiling Block
|
For Drill Bit
|
6*37-Dia.26.0-155
right-join
|
The length of steel cable 350m
|
|
|
For Slag
|
6*37-Dia.15.0-155
right-join
|
The length of steel cable 350m
|
||
|
For Auxiliary
|
6*37-Dia.15.0-155 right-join
|
The length of steel cable 135m
|
||
|
Mast’s hoisting capacity
|
200 KN
|
|
||
|
Mast’ height
|
12.9 m
|
Working face toward to pulley center line of drilling bit
|
||
|
Electric motor
|
Type
|
Y280M-8
|
|
|
|
Power
|
45 kw
|
|
||
|
Rotating Speed
|
740 r/min
|
|
||
|
Wheel size
|
tyre
|
7.50-20
|
|
|
|
Steel ring
|
20×7
|
|
||
|
Total Weight
|
8500 kg
|
|
||
|
Overall Dimension
|
For Transportation
|
8.6×2.33×2.8 m
|
|
|
|
For Working
|
5.8×2.33×12.7 m
|
|
||
|
Moving mode
|
Towed by vehicle
|
|
||
|
Hauling Speed
|
20 km/h
|
Towed by Vehicle
|
||