Specification
|
Length
|
81mm(body)
|
|
Diameter
|
23.2mm
|
|
Weight of body
|
35.25g
|
|
Size of 14430(650mAh)
|
L43*D14mm
|
|
Size of 14500(750mAh)
|
L45*D14mm
|
|
Size of 14650(1000mAh)
|
L65*D14mm
|
|
Voltage
|
Empty 3.0V,full 4.0V
|
Body(telescopic tube)
L81mm when use 14430 battery
L89mm when use 14500 battery
L104mm when use 14650 battery
Battery:
14430:650mAh
14500:750mAh
14650:1000mAh
Charge:
1.wall charge: take down the battery from body. Then charge
2.Use EGO usb charger to charge directly
Feature and Advantage:
1.Battery protected system:
a.5 times on/off button protect system
b.Protect system battery turn over
c.Short circuit protect system
2.Smart LED variable voltage protect system
a.red led button color, is 3.4v
b.press 5times. Purple color is 3.7v
c.press 5times again, blue color is 4.0v
If you feel have burn taste when the button led color is blue. You can adjust the color to purple to try
3. Matrix telescopic system
a.Support use International standard 14430(650mAh) battery
b.support use International standard 14500(750mAh) battery
c.support use International standard 14650(1000mAh) battery
How to use telescopic ego and remark:
1.Screw the cap from body, and put the battery in it
PS: Attention “+” and “-“. The “+” inside
2.After put battery in it, the button led will flashing.
PS: remind the e-cig has ready to work
3. Press 5times to open,then 5times red led color(3.4v)/then 5times to purple led color(3.7v)/then 5times to blue led color(4.0v)
PS: you can use difference atomizer resistance accoridng to your demand and voltage
4.Press the button to smoking
PS: the press button time over 15s, the e-cig will stop to work and close by itself.
Then press 5times to open
5.When the voltage below 3.3V. the LED light will flashing 40time.
PS: Remind you the battery no power, need to charge

