Material			The material should be 100% virgin PC for case and Rubber+Nylon+EVA for pouch
Plastic Parts			No excessive scratches, flash, voids, dirt or visible mold or other obvious marks or defects on plastic parts
Rubber Oil Coating			Rubber coating must match approved sample in color and consistency of application to face and interior.
Sewn strap / stand			Sewing, gluing and color of strap to swivel stand must match approved sample with no excessive glue, missing stitched, uneveness, excess materials, loose threads or other obvious defects.
Pouch			Sewing and color of Ipad pouch must match approved sample with no missing stitched, uneveness, excess materials, loose threads or other obvious defects. Stitches should be 8 per inch or greater.
Entire Product			No obvious dirt or other contaminants on any of the components.
Logo			The logo should match to approved sample. No deformity or distortion is allowed. Defects include but are not limited to: voids, smudges, bleeding, and shorts.
Flash			None allowed on the rim, or parting line. Lightly rub fingers over edges.
Sharp protrusions			None allowed
Warp			None Allowed and part must be uniform in shape
Tape			All the master cartons should be sealed by tape. The tape should be neat, straight, fully adhered without excessive wrinkles and dirt or fingerprints underneath the adhesive.