Double Sided Diamond Stone

 Item no.T0831D,

 

    

 

Applicable scope
Suitable for kitchen knives, garden and woodworking tools etc.

Product Features:
1. Excellent sharpening performance
2. Double sided diamond design as 360Grit for coarse sharpen & 600Grit for fine honing
3. Clear plastic cover protects the stone, molded plastic base with non-slip feet for safety 
4. Oval hole design to collect and hold metal chippings.

 

     

Using Instruction
1. Place the stone on a non-slip worktop and make sure the surface is flat. 
2. Complete one or both of the following steps depending on how blunt the blades is.

Step1. for coarse sharpening: Used to repair badly damaged blade, suitable for a blunter knife.
 Start by using the coarse 360 grit of the stone, move the blade back and forth over the stone at an angle of 10 - 30 ° by using light pressure.
Generally sharpen the tools with coarse stage every six months or as required.

     
 

Step 2. for fine honing; always finish off with this step to remove any burrs that result from the re-edging and rough honing process.
Using the 600 grit of the stone, move the blade back and forth over the stone at an angle of 10 - 30 ° by using gentle pressure.
It is recommended to do it approximately once a week.
3. Clean the knife with the water or wiper and dry it after use and clean the knife sharpener with banister brush.