1. Voltage/electric current LED demonstrated that easy to distinguish of read.
2. The transformer close neighbor spray nozzle, the voltage loses lowly.
3. The electric discharge effect is superior, on the powder rate is high.
4. The direct-viewing air-flow meter demonstrated that operation great convenience.
5. The furniture structural design namely artistic is also reasonable
6. The spray gun switch uses feel to be good, service life long magnetism controls the switch.
7. Many patterns spray nozzle may be supplied of the choice.
8. The stainless steel supplies the powder barrel, clear of powder is quickly convenient.
9. General powder and metal powder may use.
Static electricity spraying machine
Art No: BU0409-1/2
Quantity min: 1sets
Payment: T/T
Shipment: 7days after receive the earnest money
Package: each for the plastic bag in a carton with wood box.1100(H)×460(W)×740(D)㎜
20’ 5.80×2.35×2.35:67sets
40’ 11.08×2.35×2.35:146sets
40” 11.08×2.35×2.65: 146sets
Specifications:
High: 960㎜
Width: 450㎜
Deep: 600㎜
Capacity of hopper: 25 kilogram
N. W: 30㎏
G..W:35㎏
The machine structure:
Control unit (including control electricity board, control air unit)-- 1 set
Manual powder spraying gun-- 1 piece
Fixture and trolley --1 set
Hopper and accessories (including pump, hose and so on) --1 set (25㎏)
Major technical parameters
Control electricity board
Input voltage: 220V/110v AC
Frequency: 50/60HZ
Input power: 30W
Output voltage: 17V/DC
Output current: 0.8A
Control voltage: 24V/DC
Control air unit
Air flow: 19 m3/h
Compressed air moisture content: 1.3g/m3 max
Compressed air index of oil: 0.01g/m3 max
Input barometric pressure: 6-8 bar
Spray gun (High pressure injection internal spraying gun)
Power source:220 V/AC
Input voltage: 0-17V/DC
Frequency: 10KHZ
Output voltage: 0-100KV maximum
Output current: 0.15MA max
High pressure injection type: Internal gun
Net weight: 570g
Features
◆ Advanced pre-setting means for electrostatic and automatic feedback control for current make great contributes towards high
powder covering ratio in spraying various of shapes of workpieces.
◆ Distinctive design of three air ways in spraying gun guarantee to obtain good conditions of powder output and ideal layer
quality.
◆ Elegant design of outlook and perfect insider quality of the equipment meets the requirements of global management idea.
The built-in high voltage static generator applies very light spraying gun with the electrical circuit imported from Germany and full stainless steel powder supply bucket. The built-in high voltage module is robust and removable, the central gas design is unique and the handy trolley can change spraying position rapidly. The high voltage module closely link spraying nozzle so that the high voltage consumption is lower, the discharging effect can be intensified, power loading rate can be increased, corners can be coated by spraying and circular atomization effect is good. The powder delivery is uniform and stable. The high voltage static generation environment is very bad and the generator is used thousands of times every day. In response to this .
The company applies anti-dust switch to fully split the electrical circuit and gas circuit. The static generation unit is fully enclosed in a box where no dust can enter, therefore, the chances of damaged dramatically decreased.
Four different adaptor inserts on the electrical circuit panel and it can be ensured that no mistake can be made. So, no matter how far you are away from us and whether or not you are good at electrical circuit, you can change the circuit board directly, which not only reduces the maintenance cost, but also shortens the maintenance time.