Model selection

1. In order to save the cost, manual control system can be selected according to the practical conditions.

2. If the clients use water without stop during 24 hours, based on the water-use time, the alternative regeneration and one-use and one-standby can be chosen from.

3. The clients can select models based on water quality requirements: single-stage can be equipped with multi-media filter, to remove the mud and sands, iron rust, colloids and suspended substances; double-stage can be equipped with activated carbon filter, to remove the pigment, odor, biochemical organics, reduce the residual chlorine and pesticide pollution; three-stage can be equipped with softened water plant.

4. Time control-timing type; flow control-flow type. In the run, single-tank, double-tank and multi-tank etc many compound modes can be selected, according to the practical needs, the users can select different types. In the operation, this device has not only the automatic operation, but also manual operation.
 

Technical indexes:

1. Inlet water index: 0.18-0.6Mpa;
2. Working temperature: 1-55℃;
3. Source water hardness: <8mmol/L;

4. Operation mode: automatic/manual

5. Output water hardness: ≤0.03mmol/L;

6. Regenerant: sodium chloride (NaCL)

7. Regeneration mode: down flow/backflow

8. Exchanger: 001*7 strong acid ion exchange resin;

9. Control mode: time/flow;

10. Working power source: 220V/50Hz.
Application scopes:

    It is widely used in the makeup water softening of steam boiler, hot water boiler, exchanger, condenser, air-conditioner, direct-fired machine etc. It is also can be used in domestic water treatment of hotels, restaurants, office-building, flats etc, furthermore, the softened water treatment of the food, beverage, brewing, washing, dyeing and printing, chemicals, hospitals etc.