I. Main technical parameters of water softener
1. Feed water temperature:5-50℃;
2. Output water hardness: ≤0.03/mmol/L;
3. If the treatment flow quantity is more than 20t/h, the compound packages can be increased till the flow quantity reaches the requirements.
4. When raw water hardness is more than or equal to 8mmol/L, we can choose the plant types from JKH series, but the water quality analysis report of source water should be provided, so as to ensure the plant to run reliably.
II. The model selection notices of softened water treatment plant
1. The water consumption per hour (unit: T/H)
2. The raw water hardness (unit:mmol/L)(as the water quality test report)
3. The raw water potassium contents (unit:ppm); (as the water quality test report)
4. Output water hardness requirements: (unit:mmol/L);
5. Working pressure (unit: Mpa); (0.2Mpa-0.6Mpa, the best value is 0.25Mpa);
6. Continuous water supply time: (unit:H)
6. Continuous water supply time: (unit:H)
7. Ambient temperature and raw water temperature (unit:℃)
III. Full automatic water softener features:
• piston screening-----seal ring design
The valve core of this control system has the unique design, and the core part is consisted of piston, seal ring, screening, it has only good hydraulic performance, but also firmness, anti-friction and anti-corrosion. The valve core is made of bronze, and coated a film of polytef, which has the small friction drag and wear resistance, when the valve works, the valve core is the sole power component. These features make the performances of control valve stable and long service life.
The valve core of this control system has the unique design, and the core part is consisted of piston, seal ring, screening, it has only good hydraulic performance, but also firmness, anti-friction and anti-corrosion. The valve core is made of bronze, and coated a film of polytef, which has the small friction drag and wear resistance, when the valve works, the valve core is the sole power component. These features make the performances of control valve stable and long service life.
• Full automatic controller:
We can set the automatic regeneration procedure based on the flow or time, the operator just need to feed the salt into salt tank regularly, the rest work will be finished by softened water plant automatically. The plant has the few faults and long service life, which can make the water quality in the 100% good condition.
We can set the automatic regeneration procedure based on the flow or time, the operator just need to feed the salt into salt tank regularly, the rest work will be finished by softened water plant automatically. The plant has the few faults and long service life, which can make the water quality in the 100% good condition.
• High flexibility, which can meet the requirements of users completely:
According to the water-use conditions, single-tank, double-tank or double-tank system can be chosen from, and then the continuous softened water supply can be realized, and the downflow/backflow regeneration system can be equipped.
• super strong anti-corrosion performance:
The tank body adopts the fiber glass structure, the valve body is made of lead-free bronze and Noryl, non-toxic and tasteless, meanwhile the plant can avoid to be corroded by regenerating liquid and the severe environment.