Features
Rugged construction providing shock, dust and moisture resistance
Dual monitor position with automatic image orientation
Automatic arc calibration and iber identiication
User-selectable iber clamping method sheath clamp or fiber holders
Auto-start tube heater feature
Color LCD display with anti-relective coating for excellent visibility in bright sunlight
Simultaneous battery charge and splicer operation
Long life battery (up to 160 splice/heat cycles per charge)
Detachable work table incorporated into the transit case
Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet
Green friendly RoHS & WEEE compliant
Specifications
Model
|
FSM-60S
|
Applicable Fibers
|
SM(G.652),MM(G.651), DS(G.653),NZ-DS(G.655)
|
Cladding Diameter
|
80 um to150 um
|
Coating Diameter
|
100 um to 1000 um
|
Fiber Cleave Length
|
8 to 16mm with 250um coating diameter, 16mm with 900um coating diameter
|
Typical Average Splice Loss
|
0.02dB with Sm, 0.01dB with mm, 0.04dB with DS, 0.04dB with NZDS
|
Splicing Time
|
Typical 9 seconds with standard single-mode fiber
|
Arc Calibration method
|
Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
|
Splicing modes
|
100 preset and user programmable modes
|
Splice Loss Estimate
|
Based upon dual camera core alignment data
|
Storage of Splice Result
|
Last 2000 results to be stored in the internal memory
|
Fiber Display
|
X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
|
Magnification
|
300X for single X or Y view, or 187X for X and Y view
|
Viewing method
|
Dual cameras with 4.1 inch TFT color LCD monitor
|
Operating Condition
|
0 to 5,000 m above sea level, 0 to 95 % RH and -10 to 50°C respectively
|
mechanical Proof Test
|
1.96 to 2.25N
|
Tube Heater
|
Built-in tube heater with 30 heating modes; auto-start function
|
Tube Heating Time
|
Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3(40), 35-55 seconds with Fujikura micro sleeves
|
Protection Sleeve Length
|
60mm, 40mm, micro
|
Splice Cycles with Battery
|
Typical 160 cycles with power save functions activated
|
Power Supply
|
Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11, 13.2V DC with BTR-08 battery
|
Terminals
|
USB 1.1 (USB-B type) for PC communication.
Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
|
Wind Protection
|
Max. wind velocity of 15m/s. (34 mph)
|
Dimensions (W × D × H )
|
136 × 161 × 143 mm; 5.3 × 6.3 × 5.6 inches
|
Weight
|
2.3 kg (5.1 lbs) with AC adapter; 2.7 kg (5.9 lbs) with BTR-08 battery
|