NanHai Display Interactive touch foil is almost 100% transparent in color and can be installed with a holographic rear projection film for use as a holographic touch screen on glass. The Foil is connected to the computer with a standard USB cable, very simple to set up.
|
Foil Size |
16:9: 30"- 120" ; 4:3: 30"- 100" |
|
Customizable Features |
Sizes(below 120’’), Tail Length, Tail Width, Tail Position |
|
Fixing Options |
Adhesive, Permanent and Removable Options available |
|
Foil Thickness |
0.2mm
|
|
Light Transmission |
97.4%
|
|
Touch Pressure |
0
|
|
Position Accuracy |
Approximately 1mm relative, 3mm absolute, No Drift |
|
Speed of Response |
Dependant on material thickness , Typically 10ms ~ 50ms |
|
Supply Voltage |
DC 5V +/- 5% |
|
Power
|
<2W
|
|
EMC
|
CE, FCC |
|
Noise
|
NO
|
|
Temperature Range |
Better than -20 to +70°C |
|
Humidity Range |
0% ~ 95% |
|
Output
|
RS232C / USB |
|
Air Tightness |
NEMA4, IP64 |
|
Anti Reflective |
Anti reflective of sunshine and all accurate touch |
|
Software Compatibility |
Windows Operating Systems |
|
Sensitivity
|
Can be programmed for different thickness of glass and even with gloved hands. Standard configuration functions with non-metallic single construction glass 20mm thick inclusive of glass and air gap. Sensitivity through Double Glazing also possible. |
|
Working Life |
More than 15 years |
*All specifications in this short form are subject to change without prior notice.