|
LED dimmable power supply is built-in advanced PWM technology, can work with our 0-10V LED dimmer to adjust the brightness of LED lights. The LED dimmer has a wall-mounted box with potentionmeter, it can be installed on the wall very easily to adjust the brightness by just turning the knob. |
|
|
|
|
|
|
|
Features: |
|
|
|
1. Single-channel constant current output control; |
|
|
2. Compatible with 0-10V or 0-10 voltage regulator dimmers analog dimming; |
|
3. Dimming curve is very soft and smoothly, no flicker at all; |
|
4. Can be used as a 30-200W constant current power supply; |
|
5. One dimmer can adjust the brightness of many LED lights in-phase; |
|
|
|
|
|
|
Parameters: |
|
|
|
|
Model: |
CHFTG40700E |
CHFTG80350E |
|
Certificate |
CE & Rohs |
|
Based on: |
IEC 61347 |
|
Input |
Rated voltage |
AC170～250V/90-130V |
|
Frequency: |
50～60Hz |
|
power(On Load): |
≤39 |
≤33 |
|
Output |
current (On Load): |
DC 700±20mA, Diming Voltage =10V |
DC 350±10mA, Diming Voltage =10V |
|
Min adjustable current |
DC 5±3 mA, Diming Voltage =0V |
DC 5±3 mA, Diming Voltage =0V |
|
voltage (On load): |
DC 10～45V |
DC 30～80V |
|
voltage(standby) |
DC≤50V |
DC≤85V |
|
Short-circuits protection: |
short-circuit for 1-2 seconds, shut down o/p voltage, recovers when the fault condition is removed |
|
Over load Protection: |
Shut down o/p voltage, re-power on to recover after the faulty condition is removed |
|
Withstand voltage |
Input-Output |
AC 2 KV/5mA 1Min |
|
Input-FG |
AC 2 KV/5mA 1Min |
|
Others |
External appearance |
1. No dirty vestige, scratch ,epoxy,and no defective units |
|
2. Power cable is correctly marked |
|
3.The date is clearly marked |
|
Mark |
The label is right & clear, without folding lines |
|
File |
check if manual and other documents are put in |
|
ripple |
≤1Vpp (120Hz) |
|
voltage to earth |
≤10Vac |
|
Protection grade |
IP67 |
|
Working Temperature |
-25℃～+45℃ |
