Single row Angular Contact Ball Bearings 7028c
1 Angular Contact Ball Bearings
2 low price
3 high quality
4 good service
2 low price
3 high quality
4 good service
Angular Contact Ball Bearings 7028c:
|
Model Number
|
7028c
|
|
Brand Name
|
BETTON
|
|
Structure
|
Angular Contact
|
|
Type
|
ball
|
|
Bore Size
|
140mm
|
|
Outside Diameter
|
210mm
|
|
width
|
33mm
|
|
Seals Type
|
Open
|
|
Material
|
Ring Material Chrome Steel ,Carbon steel,Stainless steel
|
|
Cage material
|
Nylon ,steel , brass
|
|
Clearance
|
C0,C2,C3,C4,C5
|
|
Vibration
|
Zv1,Zv2 and Zv3
|
|
Precision Rating
|
P0,P6,P5
|
|
Greese
|
As you requirement, such as SRL ,PS2, Alvania R12 and so on .
|
|
Number of Row
|
Single Row
|
Fetures:
Single row angular contact ball bearings can withstand the radial and axial load. Although this type of bearing can only afford a oneway axial load, with another bear the load reverse bearings used in combination. Angular contact ball bearings can not be a split. Angular contact ball bearings for high speed, automatic aligning capacity is very limited.72B and 73BFAG single row angular contact ball bearings for the contact angle of 40 ° , so it can withstand a lot of axial load.
DOUBLE-ROW ANGULAR CONTACT BALL BEARINGS
This is basically a back-to-back mounting of two single-row angular contact ball bearings, but their inner and outer rings are each integrated into one. Axial loads in both directions can be sustained, and the capacity to sustain moments is good. This type is used as fixed-end bearings. Their cages are pressed steel.
This is basically a back-to-back mounting of two single-row angular contact ball bearings, but their inner and outer rings are each integrated into one. Axial loads in both directions can be sustained, and the capacity to sustain moments is good. This type is used as fixed-end bearings. Their cages are pressed steel.