4000C/H 250ML automatic cup filling machine

 

sperfication

 

Automatic filling and sealing machine, use prefabfilm of cover, machine hand suck and put the cover, exactly quickly,wholesomely and unfailingly.Because the film of vocer is as big as the mouth of cup, so the product's appearance is more beautiful. Base on the demand, you can add the whole winding film heat-sealing two uses machine.

 

Heating sheet: The process consists of heating-Pellet and Cylinder-Components. The heating-system adopts contact heater. The equipment takes a step forward; according to different sheets then the heating-system usually adopts the upper and lower heating for 3-5 steps. Temperature control 200.Heating-Pellet auto-opens and raises about 5-10mm when the machine debugged or heated. The Heating-Pellet adopt aluminum-alloy materials and contact surfaces plated PTFE material.

 

 Forming cup: The process consists of installation-rack, the upper and lowers molding cylinder and working-cylinder. When heating-softening sheet, to the sheet inflate or vacuumize for achieve formed purpose. the part equips with cooling water system, able to date, serial number and other words print on the forming mold. The words can been changed.

 

 Filling: The process consists of barrel, access valve, rotary valve and filling-quantitative tank. Filling consists of two groups of the filling heads and able to been synchronized filling. When the rotary valve rotate one side, the Filling-quantitative and the access valve are connect. First put stuff filling into the filling-quantitative tank with piston, then the filling-quantitative with piston controls and dosing-filling into the forming cups.

 

 Putting seal-film: The process consists of laded-film-rack and optical-membrane’s devices, they formed a whole. The optical-membrane adopts way stretch when it shifts and photoelectric-switch detects signal, push the corrective-device to lengthen a little the seal-film for achieve the purpose of correcting. (Equipped with UV sterilizer)

 

Sealing: The process consists of the upper and lowers cylinder, seal-film-care, leader-pin-bushing and rack. When stopping forward-step, the lower-film go up, then the upper-shrink-wraps press down and keep a certain time for achieve optimal sealing effect. The temperature-control device adopts intelligent temperatue-control-table.General adjustable range 0-20degrees, accuracy up to +/- 1%.