AC servo driver (GTAS-50A) Description:
(more info you can find our company in google search with "sotengcnc")
*used to driver servo motor with power capacity more than 2.5kw, but less than 5.5kw;
*Input power: 3pH AC220V, -15-+10%, 50/60Hz
*Operating temperature: 0-40deg (no freezing), bellow 80%RH (no dewing)*Storage/delivery temperature/humidity: -40-50deg, bellow 80%RH (no dewing)
*Atmosphere environment: 86-106kPa
*Control mode: 1. Position control 2. Speed control 3. Torque control 4. JOG running*Control input: 1. Servo ready output 2. Servo alarm output 3. Positioning finish output/speed reach to output.
*Position control: Input mode: 1. Pulse + Sign 2. CCW pulse/CW pulse 3.2pH A/B perpendicular pulse
*Electric gear: 1-32767/1-32767
*Feedback pulse: 2500 lines/rpm
*Speed control: 4 kinds of internal speed
*Acceleration function: Parameter setting 1-10000Ms/1000r/min
*Monitor function: Revolution, current position, instruction pulse accumulation, position deviation, motor torque, motor current, linear speed, rotor absolute position, instruction pulse frequency, running status, input output terminal signal etc.*Protection function: Over-speed, over-pressure, over-current, over-loading, brake abnormal, encoder abnormal, control power abnormal, position out-of tolerance etc.
|
Model
|
GTAS-50A
|
||
|
Input power
|
3-phase AC220V -15%--+10% 50/60Hz
|
||
|
Environment
|
temperature
|
Work: 0--40° C storage: -40° C--50° C
|
|
|
Humidity
|
40%--80%(no dewing)
|
||
|
atmospheric pressure
|
86--106kPa
|
||
|
Control method
|
Position control,,speed control, torque control
|
||
|
Regenerative brake
|
Built-in
|
||
|
Characteristic Characteristics |
Speed frequency response
|
≥ 250Hz
|
|
|
Speed fluctuation rate
|
< ± 0.03( load 0--100%); < ± 0.02(power supply -15%--+10%) (numerical value corresponding to rated speed) |
||
|
Timing ratio
|
1: 5000
|
||
|
Pulse frequency
|
≤ 500kHz
|
||
|
Control input |
1)Servo enable 2)alarm clearance 3)CCW servo inhibit 4)CW servo inhibit 5)Deviation counter zero/speed selection 1/zero speed clamping 6) instruction pulse inhibit/speed selection 2 7)CCW torque limit 8)CW torque limit | ||
|
Control output
|
1) servo ready output 2)servo alarm output 3)positioning completing output/speed in-position output 4)mechanical brake output | ||
|
Position control
|
Input method
|
1)pulse+sign 2)CCW pulse/CW pulse 3)2-phase A/B orthogonal pulse | |
|
Electrical gear
|
1-32767/1-32767
|
||
|
Feedback pulse
|
2500line/rev
|
||
|
Speed control
|
4 kinds of internal speed
|
||
|
Acceleration function
|
Parameter setting: 1-10000ms / 1000r/min
|
||
|
Monitor function
|
Speed, current position, instruction pulse accumulation, position deviation, motor torque, motor current, linear speed, rotor absolute position, instruction pulse frequency, running state, input/output terminal signal and so on. | ||
|
Protection function
|
Overspeed, overvoltage/undervoltage of main power supply, overcurrent, overload, brake abnormity, encoder abnormity, control power supply abnormity, position out-of-toleration | ||
|
Load inertia
|
Less than 5 times of motor inertia
|
||