Used Warping Machine
Optimally and flexibly used in the warping of various kinds of nylon, faber, cotton yarn anr etc.
Diameter of the application beam is below 400mm, diameter of inside hole is 17mm or 20mm, inside length is 255mm.
Speed Adjustment
Frequency control: 0~350r/min. ( Line Speed 0~390m/min)
Set Length
Used the counter to set any warp length according to the requirement, this measure can reduce the loss of warp.
Width and Density Adjustment
Adopt 4 pieces of W-reed; adjust width and the left and right device randoly.
Motor 2HP/4P/380V3Phase
Optimally and flexibly used in the warping of various kinds of nylon, faber, cotton yarn anr etc.
Diameter of the application beam is below 400mm, diameter of inside hole is 17mm or 20mm, inside length is 255mm.
Speed Adjustment
Frequency control: 0~350r/min. ( Line Speed 0~390m/min)
Set Length
Used the counter to set any warp length according to the requirement, this measure can reduce the loss of warp.
Width and Density Adjustment
Adopt 4 pieces of W-reed; adjust width and the left and right device randoly.
Motor 2HP/4P/380V3Phase