HID Back-up Light Kit(15W):
Specification:
1. Model: T10, T20, S25
2. Output Power: 15W
3. Input Voltage Range: 9V~16V(DC)
4. Start Time: 90% in 3's
5. Luminance: 2500LM
6. Life time: >50, 000hrs
7. Color Temp: 4300K, 6000K, 8000K
The Specification of HID Ballast:
1. Output Power: 15W
2. Input Voltage Range: 8V~16V(DC)
3. I-Max: 2.5A
4. I-Out: 1.5A
5. T-case: -40C-deg ~ 85C-deg
The feature:
1. HID back-up xenon lamp shockproof
2. High quality, high brightness
3. With CE certificate
4. Long life Span
5. One year warranty
Packing Detail:
1) 2PCS of 15W ballast
2) 2PCS of 15W HID bulb
3) 2PCS of connection wire
4) 1PCS of install manual
5) 6 PCS of masking tape
Installation Notes:
1. Before the installation, pls make sure both halogen backup light and car power are turned off.
2. Carefully check out if the focus of HID back-up light is in according to the car halogen light. If both focus are not the same, HID light will appear astigmatism after installed. The astigmatism may affect lamp working in a negative way.
3. The placement of ballast and connector wire, depend on the situation inside of the car. Just ensure both itemds are well setted.
4. For the three backup light models: T15, 3156, 7440, perhaps positive pole and negative pole were convcersed if the lamp can't turn on. You have to replug power supply.
If you have any question, please contact us any time.
Specification:
1. Model: T10, T20, S25
2. Output Power: 15W
3. Input Voltage Range: 9V~16V(DC)
4. Start Time: 90% in 3's
5. Luminance: 2500LM
6. Life time: >50, 000hrs
7. Color Temp: 4300K, 6000K, 8000K
The Specification of HID Ballast:
1. Output Power: 15W
2. Input Voltage Range: 8V~16V(DC)
3. I-Max: 2.5A
4. I-Out: 1.5A
5. T-case: -40C-deg ~ 85C-deg
The feature:
1. HID back-up xenon lamp shockproof
2. High quality, high brightness
3. With CE certificate
4. Long life Span
5. One year warranty
Packing Detail:
1) 2PCS of 15W ballast
2) 2PCS of 15W HID bulb
3) 2PCS of connection wire
4) 1PCS of install manual
5) 6 PCS of masking tape
Installation Notes:
1. Before the installation, pls make sure both halogen backup light and car power are turned off.
2. Carefully check out if the focus of HID back-up light is in according to the car halogen light. If both focus are not the same, HID light will appear astigmatism after installed. The astigmatism may affect lamp working in a negative way.
3. The placement of ballast and connector wire, depend on the situation inside of the car. Just ensure both itemds are well setted.
4. For the three backup light models: T15, 3156, 7440, perhaps positive pole and negative pole were convcersed if the lamp can't turn on. You have to replug power supply.
If you have any question, please contact us any time.