• Model DBF-64S

• station no. 4

• Forging force 35,000 KGS

• Max cutting diameter 8 MM

• Max cutting length 80 MM

• Production speed 140-210 PCS/MIN

• Max. P.K.O. Length 12 MM

• Kick-Out length 70 MM

• Main motor power 15 KW

• Cut-off-die overall size 30*45L MM

• Punch die overall size 40*90L MM

• Playing die overall size 50*85L MM

• Mould distance 60 MM

• Machine weight 8,000 KGS

• Producible screw diameter 3-6 MM

• Producible screw length 10-65 MM

•

• This machine is fully automatic and high-speed forming equipment.suit for bellow products.

• 1.DIN.AISI .GB.standard fasteners

• 2.Non-standard fasteners and massive produced metal parts for automotive electronic and steel structure etc.

•

•

• Advantage:

• • Equipped with pneumatic clutch and special electric safety system, which stop the machine instaneously in case of air failure. Power failure or any accident, unlike the conventional Header. Pneumatic clutch achieve inching ,single stroke ,continuous stroke easily!

• • The removal of residual stresses was carried out for the bed and main sliding table etc. To prevent deformation .Ensure long time stable precision.

• •Pressing and feeding wire is actuated by pawl via the control of air cylinder, the pawl is fixed an auto-raise device, when the pawl goes back, it can raise, so the friction and noise can be eliminated, further more this device can prevent the ratchet running in reverse direction. However, there are two overdrive clutches fixed in the feeding course, it can guarantee the feed being beyond retreat.

• •Wire cutting part is actuated by strong link-block system, the movement is stable and reliable, as well as by using circular shears for assuring the kerf clear and neat.

 

• • Increased productivity at lower operational cost and manpower.

• • more