SI series ISO6431 standard pneumatic cylinders are manufactured according to ISO6431 standard and VDMA24562 standard.
The bore size can be from 32mm to 200mm. In terms of appearance, it can be Mickey mouse and Tie-rod types. In terms of function, it can be basic type, double-shaft type, double-shaft and adjustable stroke type, etc.
Based on adjustable cushion, the front and rear cylinder end caps can make cylinder with a smooth, safe and noise-free operation. Due to the cylinder front cover has self-lubricating bearings, the rods don't need any further lubrication.
Please see some specifications of SI series ISO6431 standard pneumatic cylinders as following:
In our workshop, we have advanced equipments, experienced engineers and workers, strict quality control systems, to check each production step, then to ensure each cylinder wtih good quality, stability and safety.
If you are interested in any of our pneumatic cylinders, welcome to contact us at once, we will respond you at the first time.
WE HAVE ENGLISH SPEAKING STAFF READY TO ASSIST WITH YOUR ENQUIRES
IF WE DO NOT HAVE YOUR PRODUCT WE CAN ASSIST IN GETTING IT FOR YOU
The bore size can be from 32mm to 200mm. In terms of appearance, it can be Mickey mouse and Tie-rod types. In terms of function, it can be basic type, double-shaft type, double-shaft and adjustable stroke type, etc.
Based on adjustable cushion, the front and rear cylinder end caps can make cylinder with a smooth, safe and noise-free operation. Due to the cylinder front cover has self-lubricating bearings, the rods don't need any further lubrication.
Please see some specifications of SI series ISO6431 standard pneumatic cylinders as following:
Bore size | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 200 |
Acting type | Double acting |
Working medium | Clean air |
Mounting type | Basic type FA FB CA CB CR LB TC TC-M |
Working pressure | 0.1~1.0MPa |
Guaranteed pressure | 1.5MPa |
Working temperature | -5~70°C |
Speed range | 50~800mm/s |
Cushion type | Adjustable cushion |
Working life | >4000km |
In our workshop, we have advanced equipments, experienced engineers and workers, strict quality control systems, to check each production step, then to ensure each cylinder wtih good quality, stability and safety.
If you are interested in any of our pneumatic cylinders, welcome to contact us at once, we will respond you at the first time.
WE HAVE ENGLISH SPEAKING STAFF READY TO ASSIST WITH YOUR ENQUIRES
IF WE DO NOT HAVE YOUR PRODUCT WE CAN ASSIST IN GETTING IT FOR YOU