Single component, room temperature solidification, resistance High Temperature
High Temperature RTV Silicone Gasket Maker
1. Chemical Properties
This product is a one component RTV silicone sealant, curing competely without excitant odour release. It has three high resistance characteristics, oil resistance, high temperature resistance, resistance to high pressure, Operation safety under 15MPA pressure.
2. Characteristics
Easy to use: Squeeze easily at any time.
Ambient curable, apply to the engine and transmission of high performance sealing.
Excellent resistance to medium resistance aging, ultraviolet light can withstand oil, gas, water, etc.
Excellent corrosion resistance: Used in all kinds of steel and difference temperature condition.
3. Technical Index
Type: 265A
Color: Blue
4. Application
High temperature resistant silicone sealant is designed for automobile production of bonding, sealing. Design for single Component formula, acid&neutral Solidified into elastic rubber strip. Used for free, and can be used in Gasket maker, internal combustion engines, Steam turbine, automobile, gear box, compressor, household appliances. Construction machinery, surface of Engineering machinery, Flange, hydraulic system, threaded connector seal, sealing against, oil pump, water pump, oil filter bearing, the oil pan, all is good proof leakage Sealing function, can prolong the service life of the machine equipment.
5. Usage
First of all. Clean up the base material surface water, dust, grease If necessary, cleaning with solvent such as butyl, xylene, ketones) cleaning with dishcloth wipe all the residue, make full clean, dry base material. Interface with duct tape around to ensure that cover the surface of the seal of lines perfect. Thorn aluminum tube with the cup. If joint width is greater than 15 millimeter, need to repeated coating glue, trim the surface of the glue with cutting tools, remove excess rubber material before peel off the tape, if there is a tear stains it can be used wet cloth off: The surface will be dry in ten minutes after squeezing out the glue, then need to be completely sulfide sulfide 24 hours or longer, according to the thickness of the glue and environmental temperature, humidity based on external conditions accordingly.
6. Packaging
Description Packing Packing size(cm) Volumen (m3)
15 g/tube 800 PCS/carton 51.5x44.5x23.5 0.0540
25 g/tube 400 PCS/carton 55.5x28.0x25.5 0.0397
32 g/ blister card 144 PCS/carton 48.0x25.5x38.0 0.0466
50 g/ blister card 144 PCS/carton 49.5x25.5x41.5 0.0524
70 g/ blister card 144 PCS/carton 51.5x25.5x43.5 0.0572
85 g blister card 144 PCS/carton 51.5x25.5x43.5 0.0572
300 ml/ cartridge 24 PCS/carton 31.0x21.0x25.5 0.0167
200 kg/drum / 60.0x60.0x96.0 0.3456
7. Storage
Stored in cool, dry and ventilated places with cover sealed.