This machine can clean and oil the parallel shank or bending handpiece accurately and 
easily at any time. It has the character of high security easy operation.

Three dental handpieces can be oiled and cleaned at the same time.
Swing pinion can effectively clean and oil the dental handpiece from different angles.
Having completed the procedure of the cleaning and oiling, the remaining oil can be 
cleared by pressing the air key.
Different handpieces can be oiled by choosing the short mode. The long mode, and the
extra-long mode.
Working Procedures:
Put the handpieces into the machine. 
Close the door. 
You can set the time with three time settings(Short, Long, Extra-long). 
Push the “Start” button.
Specification:
The use of this dental handpiece cleaner can improve the life span of turbines by up to 40%.

Rated Voltage: AC120V-230V 50HZ/60Hz 
Air Pressure: 0.35～O.60Mpa (3.5～6.0kgf/cm2)(50～85psi) 
Reservoir Volume: 350mL 
Overall Dimension: 280mm×360mm×275mm 
Net Weigh: 6.8kg(not including packaging)

The economic benefits of high-speed lubricants can be seen immediately.

A simple operation, everyone can operate it. 
It has a professional air filter.

Filling the tank is simple on a level surface.
Mode Time of cleaning and oiling Time of cleaning 
Short Mode= 35 Seconds.
Long Mode = 45 Seconds 
Longest Mode = 50 Seconds

 

Three Teflon coated non-stick reservoirs 
Illuminated On/Off switch 
Indicator light that goes off when unit reaches desired temperature 
Variable temperatures range = 60°F-270°F (30°C-130°C) 
Temperature controlled rapid heating 
Weight: 6.8KG. 
Voltage:110V or 220V

 

1 New Automatic Dental handpiece maintenance system/lubricating device (NJYY-094) 
(no handpieces are included)
1 Operation manual
1 free ADAPTOR PLUG CONVERTER if needed