Product Main

Specifications

 
Products name:
 
 
 Brone copper pewter antique doorbell  lighted push-button
 
 
Item Descriptions:
  • For use with wired chimes bells and buzzers
  • Do not use with a battery powered chime
  • Solid brass escutcheon with white push button and with stepped edge
  • 2-3/4 length x 1-1/4 width
  • 8-24 volt
  • Wired - Flush Mount
  • Lighted
  • White Button
  • Color=Brass
Installation: 
 
      1.Using the button plate as a template, mark the location of the two screw holes. Drill a 1/16 in.
 
         Diameter pilot hole for each screw.
 
      2. Button requries a 5/8 in. Hole approximately 3/4 in. Deep at desired location.
 
      3. Attach wires leads to each terminal on button.
 
      4. Push wires back into hole along with connected button.
 
      5. Mount button plate with screws provided.
 
Note:  if using with a battery-powered chime, loosen the screws on back and remove the bulb from push button.