W-210A is a line array system which is made of two 10” neodymium woofers, two 2” titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Wherever low frequency extension is required, a W-210A will integrate seamlessly with W-250A line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-210A is very versatile and scalable for a wide range of applications in touring performance, corporate and fixed installation fields.
DESCRIPTION and APPLICATION
W-250A is dedicated high performance sub-bass system designed to augment the low frequency output of the W-210A, W-250A is a sub-bass enclosure which must be flown with W-210A. So its physical dimensions are identical to the W-210A and it is equipped with the same proprietary rigging system. It features with twin 15” neodymium woofers with magnet structure and suspensions engineered for maximum linear excursion.
DESCRIPTION and APPLICATION
W-250A is dedicated high performance sub-bass system designed to augment the low frequency output of the W-210A, W-250A is a sub-bass enclosure which must be flown with W-210A. So its physical dimensions are identical to the W-210A and it is equipped with the same proprietary rigging system. It features with twin 15” neodymium woofers with magnet structure and suspensions engineered for maximum linear excursion.
|
Model |
W-210A/W-250A
|
|
Type
|
Line array system
|
|
Line array sub-bass system(W-250A)
|
|
|
Frequency Response
|
55Hz-20KHz±3dB
|
|
40Hz-150Hz±3dB(W-250A)
|
|
|
Directivity index(Dl)
|
12(±2)1.2KHz-16KHz
|
|
Power handing
|
LF 500W(RMS)1000W(PEAK)
|
|
HF 160W(RMS)320W(PEAK)
|
|
|
1200W(RMS)2400W(PEAK)(W-250A)
|
|
|
Sensitivity
|
LF 99dB(1W/1M)
|
|
HF 108dB(1W/1M)
|
|
|
112dB(1W/1M)(W-250A)
|
|
|
Max/S.P.L
|
LF 127dB(PEAK/1M)
|
|
HF 127dB(PEAK/1M)
|
|
|
143dB(PEAK/1M)(W-250A)
|
|
|
LF section
|
2×10"(260mm) neodymium woofer
|
|
75mm(3in)coil
|
|
|
Components
|
2×15"(380mm) woofers
|
|
100mm(4in)coil(W-250A)
|
|
|
Nominal impedance
|
16 ohm
|
|
4 ohm(W-250A)
|
|
|
HF section
|
2×2"neodymium compression driver
|
|
with 51mm titanium diaphragm
|
|
|
Nominal impedance
|
16 ohm
|
|
Output section
|
2-channel
|
|
Dispersion pattern
|
110°H×9°V
|
|
Finish
|
Water-proof,wear-resistant textured black paint
|
|
Array design
|
Arrays of less than 3×W-210A will
|
|
provide poor dispersion control and
|
|
|
are neither recommended nor supported
|
|
|
Speaker cables
|
LF 1(+)1(-) HF 2(+)2(-)
|
|
1(+)1(-) (W-250A)
|
|
|
Rigging system
|
Please refer to the W-210A user
|
|
manual before any operation
|
|
|
Input connectors
|
2×NL4MP speakon
|
|
Recommend crossover
|
LF 45Hz-1200Hz
|
|
HF 1200Hz-20KHz
|
|
|
35Hz-120Hz(W-250A)
|
|
|
Dimensions
|
855×293×600mm(W×H×D)
|
|
855×440×820mm(W×H×D)(W-250A)
|
|
|
Package dimensions
|
925×360×670mm/0.22cbm
|
|
925×510×890mm/0.42cbm(W-250A)
|
|
|
Enclosure
|
Birch plywood
|
|
Net weight
|
42kg (W-210A)/ 81kg (W-250A)
|
|
Gross weight
|
45kg (W-210A)/ 84kg (W-250A)
|