ASME/ASTM STANDARD SPECIFICATION | ||||||||||||
BLACK NOMINAL SEAMLESS STEEL PIPE (ASME SA53/ASTM A53) | ||||||||||||
Standard: ASME SA53/ASTM A53 Steel grades: GRADE A, GRADE B | ||||||||||||
Delivery condition: Hot-finished | ||||||||||||
Size range: OD NPS 2 1/2 TO NPS 24, WT 6MM TO 35MM, ACCORDING TO ASME/ANSI B36.10M | ||||||||||||
Tolerance: according to ASME SA53/ASTM A53 | ||||||||||||
Length: customized according to requirements | ||||||||||||
Certificate: EN 10204/3.1 | ||||||||||||
GENERAL INFORMATION: | ||||||||||||
Pipes are intended for mechanical and pressure applications, as well as ordinary uses in steam,water, gas and airlines. | ||||||||||||
CHEMICAL COMPOSITION (CAST ANALYSIS) IN% | ||||||||||||
Steel grade |
delivery condition |
C max |
Si max |
Mn max |
P max |
S max |
Ni max |
Cr max |
Cu max |
Mo max |
V max |
|
A | Hot-finished | 0.25 | -- | 0.95 | 0.050 | 0.05 | 0.40 | 0.40 | 0.40 | 0.15 | 0.08 | |
B | Hot-finished | 0.30 | -- | 1.20 | 0.050 | 0.05 | 0.40 | 0.40 | 0.40 | 0.15 | 0.08 | |
MECHANICAL PROPERTIES | ||||||||||||
Steel grade |
Yield strength Min (Mpa) |
Tensile strength Min(Mpa) |
Elongation A Min(%) |
|||||||||
A | 205 | 330 | AS PER ASME SA53/ASTM A53 | |||||||||
B | 240 | 415 |