3.5 inch digital peephole with doorbell automaticlly take photoes
Step 2: Insert Peephole lens through door and clevis from outside.
5.User manual 6.(batteries is not included)
Feature
3.5 inch TFT Screen
Automaticly take photos of visitors
Monitor and don’t disturb
Wide view angle 150degree
Saving-power design
DIY installation
More easy ,more Safe to view who is outside
Why to use it?
Effective solution to the elders poor eyesight
Effective solution to the kids not tall enough
Effective solution to the dange of being anti-peep
Where to use it ?
99% family ,Door Manufactuer ,Hotel Industry ,Secucity Industry
Function Introduction:
1. 3.5inch TFT Color Display
2. Peephole barrel(diameter):12-34.5mm
3. Fits any door:34.5-104.5mm ( thickness ),please confirm the door thickness with dealer before purchase .
4.Camera Sensor : 300,000 pixels
5.Screen will automatically be in sleep model after 10seconds once press monitor button.
6.Monitor outside anytime when press monitor button,each time will automatically take photo.
7.Built-memory ,can take 100pcs photos ,cycle replacement
8.When visitor press call button ,screen automatically turn on and take photo .
9.Press UP/DOWN key to view photos any time.Or Select preview mode in menu ,it will enter the slide mode to play automatically .
10.Menu setting (menu adjustment include:brightness adjustment,contract adjustment,color adjustment,language selection,date,time,photo's checking,delete photos)
11. 3pcs AAA battery ,support to view outside for more than 1200 times.
"Don't disturb" function :In sleep model, hold monitor button for about 3seconds, green LED light at upper right corner of indoor unit will flash twice in every 5seconds,then successfully set "don't disturb" function . In "don't disturb"model, it'll no ring sound ,no view outside when anyone press call button . Cancel "don't disturb" : hold monitor button for about 3seconds until screen turn on with video , then cancel is OK .
Product Installation:
Step1: As the picture shows,installed screws into the outdoor unit depend on the door thickness.
Step 3:
A. Tighten the screws according to the thickness of the door
B.Ensure that the 4Pin wire has go through the door and clevis,and all is fixed.
Step 4:
A.Plug 4Pin wire into socket on the back of indoor unit.
B. Then install the indoor unit into the clevis as picture show.
Components included:
1.Outdoor camera 2. Indoor monitor
3. Clevis 4.Screws(standard) 5.User manual 6.(batteries is not included)